Forums Forums Enthusiast Forums A - Z Autowirral Grande Punto Control Panel Removal - HOW?!

Im installing an AUX cable into the back of my stereo and want to install a 3.5mm socket into one of the empty switches on the dash, to keep things tidy.

I know how to fit the audio side of the job (Cables, socket, AUX-In etc)

But I dont know how to get to the buttons on the dash. I want to drill a small hole in one of them and fit one of these:

I want to install it into the button circled below:



Can anyone help please?

Think THIS may help

That looks like a git of a job

Might just drill a small hole in the stereo itself, will be much simpler...

I used to have a punto, the lead from the back to connect to an mp3 player i brought through underneath that console and just pulled it out when needed.

I bought the lead in halfords, was only about £3 at the time, plugs in with a 3.5mm socket on the end.

Cant find the iso lead on the halfrauds website. I was gonna solder the leads onto the headunit myself. I didnt want any wires anywhere so wanted to use the plug above behind the dash so all you see is a little hole for your MP3. I can get a small lead to go from my phone to the hole.

you have to order it in store, correction to what I put earlier, it is a 3.5mm plug not a socket.