Forums65
Topics76,365
Posts1,033,330
Members14,584
|
Most Online16,551 Feb 2nd, 2024
|
|
7 members (1 invisible),
10,210
guests, and
732
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
M |
T |
W |
T |
F |
S |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
Joined: Nov 2004
Posts: 7,238
Wiki Addict
|
OP
Wiki Addict
Joined: Nov 2004
Posts: 7,238 |
Took my old exhaust of the green car recently as ive decided it'd look good as a single exit system on my Si,and my little bro can put the other exit on his 1.4 mk6 scort
Questions i have are
Can a 2" bore pipe into the silencer be welded up to/clamped to,lengthened and bended to meet the back of the mid section on my brothers car (he will only be using 1 backbox including the 6x4 oval-2 1/2" short pipe-back box-2" bore mid secion connecting pipe)
I however am using the 2" mid section,from the cat,with no silencer,to where it connected to the Y pipe and i want to mate it up to the 2" pipe that enters the backbox,which then exits the backbox as a 2 1/2" pipe which then welds to the 6x4 oval. This will need the gap filling with 2" bore pipe bended and welded/clamped to fit
And if i wanted to quieten down my system,would welding a 3" bore 10 inch long pipe in the middle of the mid secion (so it gets wider for 10 inches then narrower again) will that silence it a bit?
and who could do these jobs and how much would they cost?
Ideally need a reply from Cybox (sprayforce) staff here
|
|
|
|
Joined: Nov 2003
Posts: 5,327
Forum Veteran
|
Forum Veteran
Joined: Nov 2003
Posts: 5,327 |
Can a 2" bore pipe into the silencer be welded up to/clamped to,lengthened and bended to meet the back of the mid section on my brothers car (he will only be using 1 backbox including the 6x4 oval-2 1/2" short pipe-back box-2" bore mid secion connecting pipe) Yes it can, it would help to know what car your brother has as every car is different. And if i wanted to quieten down my system,would welding a 3" bore 10 inch long pipe in the middle of the mid secion (so it gets wider for 10 inches then narrower again) will that silence it a bit? Nope mate, you need to weld a "Bullet Silencer" in there. Costs vary on every vehicle as every vehicle is different fitment. As a guide, £30 per hour labour plus brackets, clamps, reducers, mountings and consumables...
|
|
|
|
Joined: Nov 2004
Posts: 7,238
Wiki Addict
|
OP
Wiki Addict
Joined: Nov 2004
Posts: 7,238 |
Brothers got a 96 escort 1.4 and he'll be keeping the standard mid section se he needs the backbox wit 2" entry pipe adapting to the back of his mid section
Ive got a 96 escort 1.8 and im using a 2" system with a gap in it.so ill need about at the most a foot of 2" pipe bent and welded in between the gap,id really like to silence mine a tad,but i'll look into that after its initially fitted,with keeping the cat its gonna be quieter than my old one used to be
|
|
|
Click to View Topic.
|
|
Posts: 2,354
Joined: April 2009
|
|
There are no members with birthdays on this day. |
|
|
|