Ok, I bought some new HT leads, but on #4 on the existing leads, there is a some sort of ignition sensor.
I have 1 of 2 options:
1. Leave it off. 2. Try and fit it to my new HT leads.
So, if I leave it off, will it make any difference?
I've tried taking the HT leads apart to fit it, but in the process of me removing it from the old lead by taking the connectors off the end, the old lead ended up snapping so I just hacked it apart to see if the ends did come off, and they are solid and not designed to be taken apart.
So can anyone advise me on how the fook to take a HT lead apart as I can't see how the ends come off without me cutting the f'kin thing up.