Forums Forums spinking : Nissan 200sx

me too matey i'll even take you out on a quick dori if you want.

Does anybody fancies giving me a hand on weds to find out were my boost leak is comming from i wouldnt say no.

Still waiting on other bits which i think will come 2mora aswell so should start fitting them too.

Just bought this carbon gauge holder its goes were the vents are in the centre of my dash (gauges in the pic are not mine) it will be holding my boost/oil temp/oil press gauges.

Well big thanks to Chris the car now runs.

It does have a slight boost leak but the plugs were not in the best condition to say the least and here was me thinking of buying new hard pipe LOL.

Small video only as proof the thing works LOL even though its on gravel the diffs tight as you like.

At last i have driven the car.

Its been in bits since 24th of december 2006.

i will have to change the way i drive on the road with the 2way on as its alittle different to what i am used to.






Also need to find the dame locking nut key as i carnt take the other wheels off the car yet.

Jobs still to do.

fix front bumper passenger sides not right as you can see in the pics.
Fit the tein tie rods and ends.
fit the adjustable suspension arms.
fit my gauges boost/oil pressure/oil temp.

Oh and get some dori time in.

love the multi wheel thang you got goin on there

lol glad its back matey!

passed its MOT then?

Whats the diff like to drive with?

Sorry to say but....intercooler is still wonkey lol

Mutie wheel thing will be gone once i get the dame locking nuts off the car carnt find the dame things

Needed fuel so went the petrol station so i could take it COUGH

The diffs MAD went onto the dale indu estate and gave the car a boot took my foot off and well lets say sidways is alot easier to get even in a straight line.

And its the bumper that makes the intercooler look wonkey its inline with the bottom rail of the cr but the bumper has slipped down on the left hand side of the car.

Will fix it once i get the car to my house so i can use the drill and make a bracket up plus once i got back the garage i noticed that the bottom hose hadnt stayed on thats why i was getting a boost leak on the way back.

Its getting there though.

woohoo its on the road! but just like i said mines now dead and im on a pedal bike

The roles have reversed LOL

As i was on my push iron not so long ago

Yours will have alot more power than mine though matey when its back.

Made up for yu tupac, your getting there, and I'm sure there will be lots of silly video's too.

We done there matey.
Sound like fun is just around the corner.

Me silly video's NEVER lol.

Fun is to be had going round corners matey.

Just found out BOTH my adjust arms and vented light covers are only just getting sent out not very happy as i bought these on the 30th of April.

thats pants i bought a center vent gauge holder (like your carbon one) over a week ago and still aint got it.

Still havent got the

Just found a new problem with the car brought it to my house as i need power to do alittle bit of work on it and found i carnt get over the 2nd speed bump in my road LOL.

Think i'll chuck the old suspension on for now.

Isnt that always the way.

YOU CLEAN THE CAR THEN IT RAINS FOR TO MINUTES AN THEN THE SUN COMES BACK OUT RRRR




At least the cars running.

I am after for this car.

Bucket seats must be fia aproved and indate would rather they be on s13 runners
Harness's
and a cage

If anybody knows of any being sold can they send me a pm please.

vented light covers fitted slighty different shade of red but the cars getting sprayed once the kits on.