Not bad, I likes it.
Quite like the interior lights.
You got a cold air feed to the K&N?
The interior lighting looks boss mate
Not bad, I likes it.
Quite like the interior lights.
You got a cold air feed to the K&N?
not yet mate am after one
still after some more lighting for inside was thinking of putting some under front seats to light up back of car but not sure
Just pick one up from Halfrauds or eBay?
Less than a tenner should be.
Just make sure you route it away from any heat sources
will do mate when i get 5 min lol
still after some more lighting for inside was thinking of putting some under front seats to light up back of car but not sure
thats what I'm hoping to do with mine too.
Front and rear footwell lighting.
Tis a good idea mate
go for it
Is it linked up to a switch? or interior lighting circuit? or is it just stick the ciggie lighter plug in and on it comes? lol
no mate it hooked up to a switch so i can turn on and off when i want to. what the best way to secure them under seats
depends how theyre designed to fix.
some come with sticky bases so if you have somewhere to stick it to, use them maybe?
There again, if you have feet heaters, they may come off.
Depends what you have underneath your seats to fix to.
How did you fix the front ones on?
Just pick one up from Halfrauds or eBay?
Less than a tenner should be.
Just make sure you route it away from any heat sources
that wont b a problem the old pipe there from old filter that just out of pic it only about 1ft from end of filter
depends how theyre designed to fix.
some come with sticky bases so if you have somewhere to stick it to, use them maybe?
There again, if you have feet heaters, they may come off.
Depends what you have underneath your seats to fix to.
How did you fix the front ones on?
they were screwed on with 2 small self tap screws
lookin good ste, when u gonna get ur alloys matey ?
Cool mate,
if its interior lighting you want i now do Varad stuff. Have a gander on their site :
www.varad.com
lookin good ste, when u gonna get ur alloys matey ?
not getting them yet getting body kit first should be getting that october then will get wheels sorted
sweet dude !
Thats looking
The backend is very smooth looking, will keep an eye out for ya.
do you have a front pic?
not done any thing to front so not worth putting pic up all i done is change side indecators to clear once. you can normaly find my going up and down 53 lol
thanks for comment guys got another set of neons to but under front seat and also just installed a bass tube in boot will stick more pics up soon
right finally got round to putting anthor set of neons under seats also bass tube installed and working not very big have to get pram in and out of boot all the time will get some more pics up later also should have back box on b4 week end fingers crossed
some new pics not to good only taken off phone
first pic is basstube small but packs a punch needed some think small due to getting pram in and out second is neons under front seats not very good pic sorry
I can just see you sitting on the Drive at midnight so you
get a dark picture with lots of neon....
Missus Where the hell is he now -->>>
"In his car in the middle of the night looking
like blackpool is on the back seat...
I give up lol"
lmao that nearly what time it was b4 it went dark enough lmao
nice work dude
i thank you sir back box will be here b4 weekend so got that to fit next woo hoo
nice one, wot type is it & were from...? i got sumfin up me sleeve but not sayin yet lol...
3.5 inch single exit supersprint was going to go for twing exit but was unsure go tell more
nah cant matey, lol watch the mmc, just need the time..
ooo sounds interesting if this turns out to be all you doing is changing air freshener we wont be happy lmao
looooooooooooooool u soooo funny dude
any way please do not talk about your car on my mmc thank you very much
kk
lol take that as a warning
will but more pics up over weekend once backbox is on and sorted
been problems with back box so not getting it now till monday so will not be able to fit it till next weekend gutted
not good....
no mate not at all was well gutted
right got back box on way as we speak ditched the 3 inch went for nice 4 inch instead will get that fitted at weekend also got a set of springs to sort out will drop be 30 so not to bad just waiting for mate from work to get his arse down to give me a hand lol
cool matey
cant wait to see pics.
what make of backbox is it?
woo hoo back box god its huge and shiny gutted i wont be able to fit it till wekkend
right fitted backbox this afternoon i think it looks sweet plus it sounds stunning nice deep tone hope you all like
thanks mate sounds well nice got a nice deep tone to it
nice 1
I don't think it suits the car IMO, but it's up to you how you want it, and if it sound nice and not tinny, all the better
think it will suit it better once i got body kit sorted
any pics of the kit you're gettin?
just trying to find some now mate i no the rear bumber looks a lot better with that size backbox
thisis a pic of the front and rear end am after
Quite a nice kit that.
It would look a lot better with that on
looks good mate u gonna get the skirts an spolier 2 go with them
defo the skirts not sure about the spolier at the min want to try and find another one
ok had a change of bodykit am after think this one looks a lot better what you all think
Dont really like biggish body kits on saloons and out n out family cars, but the back looks okayish, so long as the car is lowered, although it does look a bit too extreme with the rear diff.
The front looks a bit poo though in my personal opinion (please dont be offended by this), it looks like its trying to be an Evo or something like that, when in truth its a Mondeo hehe. Nothing wrong with a Mondeo, just they look a bit plain to be putting such an agressive kit on.
Either way though, it would deffo look more complete if it was lowered.
2nd one is deffo better imo. black mesh makes it look allot better too.
haha whelan u spaz, always editin ur posts
I think 1st one looks better matey.
Not keen on the rear bumper of the 2nd one
just looks way ott.
whereas I think the other one looks more subtle and would look just as good without being lowered
ok had a little argument with the gate post today and car came off worse got a dent and scraped paint on wheel arch so going to have to get that sorted now
gutted!
shit happens eh!
any pics of the damage?
not at min mate will het some up tom not as bad as i first thought but still not happy will get it sorted asap
dude, thats not good...
got my self some new wheels for car at weekend but not fitted yet due to needing spiget rings for them which i will be getting wednesday will get some pics up of them on car asap hope you all like
not bad them mate.
hurry up and get them fitted and get some pics up.
what size are they?
Oh yeah, and put in as a nominee for car of the year...go on, you know you want to
they 17 mate tried 18 but stuck out to far plus rubbon on springs not worth it this year mate not done that much other wise i would
right was hoping to get wheels fitted tonight but shop were am getting spigot rings has not had them delived today so will have to wait a little longer
yer tell me about it if they left in our hall way any longer wont be able to find them under all the crap geting but on them
woo hoo got wheels fitted on car this afternoon i think they look smart well made up with them
Look nice them fella, just needs lowering a bit, you planning on taking it down?
yer mate was not going to till i but them on lol going to be next job now
Sweet... ye can come to the next members meet now haha you said you may do if you have ya wheels on lol!
lol dam thought people would forget
lol we never forget when theres cars involved
Hope ye can make it though matey, will be good to see this car and meet ye, I think Scott is planning to take his new Mondeo too.
cool mate will try my best to get to were ever it is
They're not my cuppa tea, but if you're made up, thats great
Deffo need to get it lowered though.
Hope you can make it to the next meet
I think they look alrite
kool, will look great once it's been dropped
right now wheels are on and dent on wheel arch sorted thanks to chip & fix going to be busy taking bump strips off side of car and starting to colour code the handles
yer mate looks like it going to take me long enough to clean the car in first place after dent was sorted
cleaned mine today too, only finished an hr ago so no wot u mean
atleast am dent free now so atleast that one thing
make sure u take pics...before an after!!
no worry camara is ready and waiting
right lip spoiler sprayed and fitted by my self think i done a dam good job even if i do say so my self lol next job take handles off spray them and remove bump strips
nice 1 mate
Looks good that fella, get a wider shot of the rear of the car with it on.
yer will do in min mate dont think it will show up on a wide shot lol
here is a dif view of back of car
am in middle of changing dash lights to blue leds at min so will get pics up when sorted lots to do yet lol
ok guys help needed i have got my handles colour coded but not sure what ot do over bump strips on door either take them off and leave car looking smooth or paint them here is pic of doors
what you all think
both will look good, if you smooth it you'll have to fill the holes if they are on with clips....
no mate no clips at all just held on by strong tape just need to heat the strips up to take them off
hmmmm? decisions... both would look good, why dont you photoshop it both ways.. smooth would be nice if you fancied the euro look...
go for the easiest and cheapest option - take them off
removed and smoothed would look much better imo
that what am thinking mate will look lot better smooth will have a look tommorrow and take them off got more colour coding to do first
right colour coded the front and rear bump strips on bumpers today think it looks a hell of a lot better also done handels and took bump strips off doors will get pics up of doors tommorow only just finished them
looks much better
nice mate
definately, much better
looks good that hehe didnt know what it looked like b4 had to search but i likes it
looks good ste.... like it !
thanks mate i like it to lol good job really
now i got them sorted got to keep eyes open for decent set of side skirts
ok update side skirts on there way undercar lights on there way also ordered set of headlight brows will get pics up when all fitted
where u got ur lights from ?
lol ebay been taken a hammering lol so as my bank
ur bank manager aka KERRY is gona love u haha!!
mind u when she passes she can have the mondeo an u can get u a sporty lil number hehe!!
lol she wont drive the mondeo she says its to big lol
looks quality that matey!!
thanks mate will get pics up when everything fitted
Sweet!
bud, do you want my honest opinion or should i just say nothing
hmmmm, think i can guess what you'd say cos its not a honda civic...
hmmmm, think i can guess what you'd say cos its not a honda civic...
lol, no not this time for a change.
No offence mr ste, but i just dont think the wheels or the lights suit the car !
I like the colour coding though, very nice
if we all liked the same thing then modding would be dull the lights do suit the car pics dont do them justice plus can not think of any other lights that would suit the car
I think that the standard one's smoked whould of suited it really well, would be a perfect fit and only cost you £15 max to do, just because its different, dont mean it looks good !
With the lights, each to there own, but not a fan of the wheels.
Loving the colour coding
the reson for them lights is the front ones are clear so are side repeters so think it would look daft with smoked rear light
yer see you point bud, keepin the theme of clear stuff on the car, it is possible to smoke your own head lights aswell though, and it looks well sweet on your colour car, honda make a civic in your colour and a few boys from csc have smoked their front ones and it really goes well. you could actually even smoke the lexus lights too, that would look really nice imo !
looks very nice ste, a lot better
thanks mate. head light brows got here today just in middle of spraying them up b4 fitting will get pics up soon
have you sprayed the handles and the brows yourself?
what paint did you use to match it? as its a good match
yer mate done it my self first time i sprayed as well got it from halfords mate using the colour code from car
good stuff, you use plenty of laquer?
half my car is sprayed in halfords paint now lol
yer mate plenty made up with the match though it was going to be well off
right little update light brows sprayed and fitted new break discs have come so will fitt over weekend still waitng for side skirts
this thread is useless without pics.... lol
right i decided i dont like back box any more so want a change any ideas people any help welcome
A quad exhaust like the porche camen turbo would look sweet !
right i decided i dont like back box any more so want a change any ideas people any help welcome
what r u like ste!!!!!
does kerry know lmao xx
what about a fat rage exhaust?
right colour coding finished and side skirts fitted looks brill well made up
Description: before work
Description: after work
Heh that look's sweet that matey, quite a dramatic change style wise if you don't mind me saying, whilst at the same time not ott.
i no what you mean mate i just been looking at pics of car when i first got it well shocked lol
next job window tint and drop it so it dont look like a 4x4 lol
lmao good idea
i thought so lol
Looks a lot better
Just a shame you couldn't make it to the meet
next job window tint and drop it so it dont look like a 4x4 lol
Good Mods planned next
i no mate will defo be at next i promise never done anythink with suspension so dreading swaping springs
i no mate will defo be at next i promise never done anythink with suspension so dreading swaping springs
It's a peice of piss once you know how.
If I get time I'll post a guide up of how I did mine and Seans which should help you.
I hate working with suspension though lol
ok mate nice one would help loads thanks
ok guys had a change of hart over rear lights what you all think
Description: old clear lights
Description: normal lights
Normal lights; clear lights/lexus lights
always look way out of place on car's imho.
Well, i think you know my opinion bud
gotta say imho..your lights arent the problem...your wheels are matety...just really don't suit the car!
sorry to agree with dave but he's right.
not trying to have a go mate..but if you sold them on fleabay...you could get another set...for not much more money!
i no mate but need another set b4 i sold them they are geting changed in the end but not till i have the cash
so sell them...buy another set..and dont post the old set til the new set arrive...
smart arse
why the change tho ste....
just got fed up with the clear ones mate needed a change
Normal lights; clear lights/lexus lights
always look way out of place on car's imho.
right had ago at window tinting today and looks great made up with the way it come out also orded coilovers so will no longer be a 4x4 lol
Description: coilovers
oooo looks great that, nice job on the tints
Steve are you sure they are coilovers? looks to me they are just lowering springs to fit in the exsisting shocks.
yer mate they are fully ajustable from 0 to 100mm mate same as what sean got on his
tints look great mate, fancy doing mine? lol
lmao no chance mate took me long enough to do them still got boot window to do yet lol
i got the old shape ghia x and i want to go faster in it, how? apart from getting an st
i got the old shape ghia x and i want to go faster in it, how? apart from getting an st
i got the old shape ghia x and i want to go faster in it, how? apart from getting an st
Start a new topic Rentaclown, got some helpful tips for the mondeo's, is it the mk2 or mk3?
i got the old shape ghia x and i want to go faster in it, how? apart from getting an st
drive exclusively down hill
if you want help or advice start another topice please dont use my mmc
ive got a set of the coilovers not fittied yet need to get some tools before a start putting mine but nice car mate
i no mate i getting other half uncle to help me with mine lol
you did that tinting yourself?
nice job mate
yer mate all my own work took a while to do but wanted it to look right
ok done a little work on car took the badges off rear end got a plan for removing the ford one that next job also sprayed an fitted head light brows think they look brill
Description: headlight brows
very nice mate, looks smart.
I'm liking the Autowirral stickers
Be different and take the ford one off too
yer mate its coming off i got a spare boot handle with out the ford badge just need to fill the space in and spray it
topic now dead found out today car is a write off will be a new project comig soon watch this space
Im, interested, give us some thing to keep guessing what it might be bud !
oh no matey, gutted for ye.... like what you thinkin tho....
Im, interested, give us some thing to keep guessing what it might be bud !
its got 4 wheels 1 engine few seats and a boot mate is that enough info for you
hmmm,
ST200?
no mate nothing that good lol i wish
gutted mate, you spent quite a bit of time on it aswell
looking forward to your next motor though
i no i did mate but not to worry will have to start all over again can not wait am so board not having a car to play with dont want to mod the hire car lol
lol, bbugger, it must be a car on that note lol
your right mate its a car lol
topic now dead found out today car is a write off will be a new project comig soon watch this space
Gutted
While im sure 1/2 of you will miss the old car, im pretty sure the other 1/2 doesnt want to drive a repaired car....
no mate even if i got the car back repaired i was still going to get rid of it would not want to drive it after that
no sorry mate want a decent car lol only joking mate you no what am after anyway
pah !!! i know dude..ask in work for me tho...
will do mate already asked today for you