Forums Forums dikky5 bmw 325i

theres more info on them there Click Me

and there Click Me

oh and hybrid is a company... they make intercoolers and stuff

i just thought it was the same company! sorry!

What is a Hybrid Turbo?

A hybrid turbocharger combines the quick boost response required at low engine revs, with the extra air-flow capacity needed for more power at higher revs - with excellent Turbo Technics reliability.

Hybrid turbochargers are not a new idea. Turbo Technics started producing hybrids as long ago as 1985, and today continues to lead this specialised field. A language has even evolved to describe the components employed in hybrid turbos - words such as cut-back, 360°, screw-down and quick release.

But what does it all mean?

For most road going cars, a standard specification, good quality Service Exchange Turbocharger is sufficient. Hybrid turbos only become necessary when significant performance improvement is required, normally on a modified engine. Most hybrid turbochargers will look identical to standard units from the outside. The changes occur inside, by using different aerodynamic configurations, both in the compressor and turbine housings.

As a Garrett turbo dealer, Turbo Technics are in a unique position to choose from a comprehensive range of components. This allows our engineers to "blueprint" turbocharger components to achieve the desired characteristics needed for a particular application. Obviously there are limits, but this ability sets Turbo Technics apart from others in producing very effective hybrid turbos. Most turbocharged engines respond well to increased boost pressure, but only if the engine is modified to capitalise on the change. The same can be said of turbochargers. A hybrid turbo on a standard engine may offer a small benefit, but will be more effective on a modified engine. Unfortunately, increasing the boost pressure also increases the internal loading within the turbocharger significantly. In order to compensate for this, a "screwed down" thrust bearing is sometimes used. This prevents the bearing from "lifting" at high load which can lead to oil starvation and component failure.

To continue up the hybrid ladder of performance, a "360°" thrust bearing is used. This is an entirely new bearing, manufactured by Turbo Technics, and originally developed for our competition customers, such as Ford Motorsport. It has a greater bearing contact face to withstand the high loads, which would otherwise destroy a standard bearing very quickly. Turbo Technics will occasionally specify a "cut-back" shaft wheel. This is the main exhaust-driven turbine wheel inside the turbocharger. To limit its speed to acceptable, reliable levels, and to improve the airflow, the blades are "cut back". This is a very high precision machining operation, requiring highly accurate grinding and balancing. The Turbo Technics designed and manufactured VSR balancing machine ensures that exact limits are achieved every time, regardless of the vehicle to which the turbo will be fitted, from the humble Mondeo turbo diesel to a full works Group A' Escort Cosworth.

Another way in which a hybrid turbocharger can improve an engine's performance is by improving response, or reducing turbo lag. By designing a more efficient turbocharger compatible with the engine's characteristics, Turbo Technics offer hybrid turbos which can transform a cars driveability.

The Turbo Technics range of hybrid turbochargers are also available throughout the UK Dealer Network. But beware of copies!

Some imitation hybrids are cheaper, but when inspected are found to contain only standard internal components! Only Turbo Technics turbos carry an identification plate to guarantee the genuine article.

Sums it up really. Hybrid for example would be a Renault 5 standard turbo but with an uprated ceramic turbine or stuff like that. I say get the 5 mate. U cant beat turbod motors.But then again,it looks like a bit of a worse for wear 5. Theres much better out there.And ur gonna give him a BMW 325 for that? i wouldnt. Get a standard minter if you can. My 2p

scoop that may o bin a cut n paste but scoop thats the 1st usefull thing uv eva sed. thanx. still an high level of ford concerntration in this post tho.

your gonna be hard pushed to find a 5 that hasn't been ragged unfortunatly as thats what thry're renowned for i think stay with the bmw mate, its a bit different

5s fell through. insurance company have put loads a ureasonale conditions on it. o well. im bk 2 buyin 4 my bm again. mmm. shud have an exhaust from rotheram off ebay. keep u posted. its stainless steel dtm upswept by powerflow. £60 im thinkin bargain. twin inlet twin outlet jobby. yippee

mmm. what 2 say. mmm. unluck ebay sprint continues. just aint got the bottle i dont think. didnt get exhaust. got myself ne bootlid n spoiler. alpina style rocker cover now on and engine bay cleaner than micheal jacksons bedroom. te he. pikkys 2 follow

before my bbq paint



after my paint.



te he

Lookin good dikster....!! Get the burgers on the go! lol

Nice touch dikky, looks so much tidier in there now.

GOIN ON THE TRACKDAY!!!!!!! WAHOOOOOOOO!!!!! i cant wait. mmmmmmmmm.


gonna service her b4 she goes. YIPPEEEEEEE drift, drift, drift