Clarke Mig Welder & Compressor. - 12th Jun 2011 1:47pm
Clarke 151TE Mig Welder. 'Highly Regarded' in the welding circles, so I've read. I've used it on several cars, and haven't had any troubles - I also did a Locost with it, can do 3mm - 6mm. It's in a fetching red, with typical welding scarred earthing clamp. It's £150 and I can deliver.
![[Linked Image]](http://farm4.static.flickr.com/3349/5824583042_1a1783f8c6.jpg)
IMG_0205 by Jibijib, on Flickr
![[Linked Image]](http://farm4.static.flickr.com/3514/5824580144_0dda03c442.jpg)
IMG_0206 by Jibijib, on Flickr
Also, this Clarke Ranger 35 Compressor. I have no idea what capacity it is (it's not 200l but is just under 1 metre in length) as I can't find any info on the web or the compressor itself, but it's good enough for big spray jobs. It comes with 10m of new rubber hose with the screw on attachment terminal. The plastic shroud has cracked in use, but otherwise runs fine! £100 ono.
![[Linked Image]](http://farm3.static.flickr.com/2085/5824581210_8d40734515.jpg)
![[Linked Image]](http://farm3.static.flickr.com/2051/5824582084_d17ca693e4.jpg)
IMG_0205 by Jibijib, on Flickr
IMG_0206 by Jibijib, on Flickr
Also, this Clarke Ranger 35 Compressor. I have no idea what capacity it is (it's not 200l but is just under 1 metre in length) as I can't find any info on the web or the compressor itself, but it's good enough for big spray jobs. It comes with 10m of new rubber hose with the screw on attachment terminal. The plastic shroud has cracked in use, but otherwise runs fine! £100 ono.