I bought a fish pump off ebay for my Mums fish. There's no instructions in or on the box and the seller hasn't replied to 2 emails requesting either a leaflet or a description of how to assemble it The annoying thing is, it's made by the company I bought it off so it's not like I can do a search for the destructions on t'interweb. I did look on Amazon just in case they stocked them and they do - the write ups for the company are not very good Wishing I'd done that first now but you live and learn!!

I've tried everything I think may work and tried it in the sink but so far, no joy

I know there's quite a few of you that have fancy fish so can anyone give me any advice on how to set it up? It's got a spray bar and a venturi pipe if that's any help. I'm guessing it's going to be something rather simple - like me

Have you tried doing a search? You never know what you may find? Someone may have had a problem which has been answered and also gives the info you want?
xx

Hi,is it an internal or external pump? I can call round and see if i can sort it out if your still at your mum's,anytime after 3pm

HI, if its second hand? it probably needs striping down and cleaning the impeller might still have gunge/muck from the previous owners tank?.It should come apart easily so you can clean it hope this helpful?cheers mike.

Softy - tried that but the only thing I found were complaints about the company/manufacturer They don't answer emails or the phone. It's going to be one for ebay to sort out methinks

PP - It's an internal one. I'm back home now I should have thought of you first really considering

Mike - it's brand new bud

Is the motor running on it,is the impeller turning freely by hand,as sometimes they shove packaging in to protect it!?

Just give us a shout if you need me to pop round to your mum's or yours.

what make and model is it wench ?

The motor and fan thing work fine PP, but when you attach the spray thing nothing comes out I have no idea where the Ace Venturi tube thing goes as there doesn't seem to be anywhere for it to go

It's an internal aquarium filter 200lf made by All Pond Solutions Red. This one.

Usually has an adapter fitting,instead of or with spray bar,its a tiny pump by the way not really any use for filtering tne water,more for disturbing water surface to add more oxygen.
Is it for that tank i saw if so its no bloody use to you or the fishes!
When its fully immersed try shaking it to dislodge airbubbles,cos if its got a new sponge in it they tend to trap a lot of air bubbles.

poss needs to be primed wench as PP says give it a shake

It is for that one, not as the only pump though. It was only to get a bit more oxygen in there. Just emailed them again and they've emailed the instructions.

Just followed the instructions and had to get changed as it drenched me The Flugelhorn tube thing had to go outside of the water, not under it On the plus side, it works

Cheers guys - you're all fabulous!!

Husband was the same