The bottom horizontal slat is broken, its only connected to the other 5 slats by a really small piece of plastic.

Tried superglue and other glue, not got name at moment.

So anyone know what glue to use or ideally

where I can get a replacement part ?

Its only the part with the six horizontal slats I need, quantity 3

Nomad

The glue will depend on the type of plastic.

Normal cyanoacrylate (super glue) doesn't really work on plastics. It might stick, but the repair is often brittle.

Butanone (better known as plastic cement and plastic weld) works great on ABS and other styrenes, but only those.

Contact adhesive on the other hand can stick non-porous plastics to porous surfaces. But won't hold two non-porous surfaces together very well.

You might be best with a two-part epoxy resin, such as Araldite, or a two-part super glue, such as Loctite All Plastics Superglue.

Thankyou

super glue activator
clicky

cheers

iv got some here you can use