I am trying to find some one who will do me some door builds in my cinq. Anyone out there know of someone good????

why not try it yourself?

I know that i'll **** it up and have to get someone to do it for me anyway!

you never no, you could be good at it,

heres a guide if you want to give it a try,
its for a corsa but can be used for any car,

I thought i would show a step by step guide
on how to make custom door build.

It takes time but a LOT cheaper than buying from a shop,
which can be anything up to £350. Hope this helps:

Tools:

1. Tub of P40 (fibre Glass)
2. Tub of P38 (easy filler)
3. MDF
4. Expanding foam
5. Sand paper (all sizes)
6. Plastic filer primer
7. Wood clue
8. grey primer

*FG – Fibre Glass

Step 1:
Make MDF rings, one to the size of your speaker bracket,
so the speaker will fit in. also make one for the base plate as shown below.
Also you will need pieces of wood to angle the speaker to your own personal choice.



Step 2
This is the fun part. Use expanding foam to fill the gaps in-between
the two MDF rings, so you have a base for the FG to stick to.
After that is set, cut down the excess to the shape of the MDF rings.
As shown in the picture below, in-between the MDF rings.



Step 3:
This is the tricky part.
Using P40 to mould the shape of your pod. Only put small amount
of FG on the pod, and build up the layers.
Wait till the FG has completely set before adding the next layer.
As you can see on the picture above there is the first layer of FG.

After all the layers it should look something like this:



Step 4:
After you have got the shape with the FG to your liking,
use a sander or a DA to smooth the FG.
This doesn’t have to be perfect, but to get the shape. As shown below:



Step 5:
Use P38 to skim over the FG, but only do one layer to cover the FG.
It should look something like this:



If you have electric windows, bolt these on, and filler over them to get flush (optional)

Once that is set, sand down to get it dead smooth.
And remember to feather the filler into the plastic door card (use the sand paper),
to stop it from cracking.

Step 6:
Once you have got your shaped pod,
its time to fill in all the imperfections.
To do this you will need some plastic filler primer.
Spray all over the pod as shown below.



Once done then its simply a repeat till right exercise now,
to get the plastic and pod dead smooth (this takes time)

Step 7:
Once all that is done, now you got to choose a colour to spray it!
You will have to use grey primer before you spray the pod.
After the primer has set, you can spray your pod to
what ever colour you want. After the paint has
settled (let this dry for a night) use t-cut and polish
to bring up the shine. Finish pod:

nice one lawton

It looks cool. Lets try it and see what happens! Thanks alot the pics realy help.

Failing that there is

POR Fabrication.
Peninsualr 4x4 (Spray Force)
Automotion

In no perticular order.

For details Click me

-------------------

I tell you what mate, its been a very long time since i seen a member with so much insperation in a post.

This is exactly what should be coming onto Cruisewirral forums, about modifying cars, what a great topic :cheers:

Awesome mate, will have to give this a try after christmas.

no, i havent tried it yey scooby as i bought some door cards that were allready done, i might try and make a install for the boot, and just follow the guide lines of that above

What a good topic.Im gonna try dummut like this soon. Gonna make a moulded parcel shelf to point the rear speakers into the car. May do the doors too as i plan to retrim them myself

if you want, i can write you a guide of how to re-trim door cards and roof?

quality reply mark an tis sumit im defo thinkin of tryin as its easy enuf to pick up sum old door cars from a scrappy

nice u know how to COPY an PASTE too

corsasport wasnt by anychance a helpin hand for this info

im sure i recognise the car

ssshhh, nice one john, lol, i did have to alter it abit though

Go mark go. Wanna do the vynl bit in black leatherette and the cloth bit in blue novasuede/alcantra

cheers for all the help! Have tried it out. Messed up the first dozen times or so, but now have some good looking door pods for my cinq. Twin 13cm Infinity components. Just needs a bit of sanding and paint. Will have some photo's soon. just need two black box 1's to run them. Look out Halfords!!!!!!!!

Nice tutorial mate.

yer well in mate, its inspired me to do some thing useful, i think ill do a guide to some thing, well done lawton, you have my respect.