Forums
Posted By: camaroz Rear Axle & Pinion - 21st Mar 2009 8:45pm
I will very shorlty need my new rear axle centered and tweaked.
Anyone recommend a local shop that can do this (LCA's & Panhard) pref by laser, also need the pinion angle mathed out and sorted.
Thanks in advance guys.....

Attached picture rear.jpg
Posted By: BMW Joe Re: Rear Axle & Pinion - 24th Mar 2009 9:48pm
No idea sorry.

If you find somewhere though, let us know for future reference for other members wink
Posted By: DavidB Re: Rear Axle & Pinion - 24th Mar 2009 11:35pm
I used a fabricators on Canal Street in Bootle. I worked next door and used to take stuff in (a propshaft in this case - shortened and welded). You'll find most are up to the job tbh.
© Wirral-Wikiwirral