Taken less than a week from the states.

Bought a few sets of forged pistons in the past, but these are the lightest and best quality Ive seen....

they look a bit sexual !!

What cc

Shiney Shiney! oooh

Std

The SR is an alloy block with liners. For high stress use the suggested max is 1mm overbore, but do that on a good block and have problems in the future the block is scrap

By using std sized pistons even If I score the block it can be used 0.5mm over and 1mm over.

Fit, bet they set you back a bit Stu