I have a water cooling system running in my Socket 775 board now. The following items are what i am selling 240mm Radiator from XSPC Acrylic laing Pump and Head XSPC Full EK Water block Reservoir. All hoses and water supplied 2 Xilence Red 120mm fans system is setup and running just needs installing on your case.
Why water cool? firstly it is very quiet to use water cooling, fans are used but are not even required in a well vented case. secondly the temperatures you get are very low, depending on your CPU you can get about 20 degrees idle compared to about 50 degrees.
Thirdly if you would like to do a little over clocking then you should use water to cool the system, it will beat any air system everytime.
The block is currently set up for socket 775 but i am sure it has fitments for AM3 and AM2. if you change the water block it will accomodate any CPU you have.
The full system was bought from watercoolinguk.com for over £200 i just dont use my system very much these days.
If you need a hand setting it up i can also help. I am looking for just £60 for all this gear. (you couldn't even buy the pump for that!(£68)
Hi mate the whole system is XSPC / EK and Laing. i cant remember the exact model numbers sorry, sure i can dig that kind of stuff out if essential. I used t also have a graphics card running through the system!