Forums65
Topics76,361
Posts1,033,316
Members14,578
|
Most Online16,551 Feb 2nd, 2024
|
|
4 members (2 invisible),
10,063
guests, and
413
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
M |
T |
W |
T |
F |
S |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
Joined: Dec 2003
Posts: 5,683
Wiki Guide
|
OP
Wiki Guide
Joined: Dec 2003
Posts: 5,683 |
"C20 LET bang"
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
much betetr than this!!!
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
Thats a cool tip.. And tack in, copper block used again to stop the edge burning away when welding, the trick is to start welding on the copper block and work inwards, rather than outwards.
This would be my top tip for any edge welding like this whether using a copper block or not, start at the edge and weld in, if you work out towards the edge, the heat builds up and the edges can easily be burnt away.
|
|
|
|
Joined: Feb 2009
Posts: 38
Newbeee
|
Newbeee
Joined: Feb 2009
Posts: 38 |
I've just done a rotten sill on my car. The glassfibre body doesn't make the welding too easy!! The car is now back on the road :-)
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
Thats a professional finish
When you going to come along to a meet??
|
|
|
|
Joined: Feb 2009
Posts: 38
Newbeee
|
Newbeee
Joined: Feb 2009
Posts: 38 |
It's been off the road for 5 months. Was hoping to pop over to Deeside when you were karting but missed that by a few days. Still got a few things to do but will get over to a meet one day. :-)
|
|
|
|
Joined: Dec 2003
Posts: 5,683
Wiki Guide
|
OP
Wiki Guide
Joined: Dec 2003
Posts: 5,683 |
My welding is terrible, I just get impatient after 1/4 hour. Is there a sill skin over your welding, or is that fibre glass? Must've been tricky!
"C20 LET bang"
|
|
|
|
Joined: Feb 2009
Posts: 38
Newbeee
|
Newbeee
Joined: Feb 2009
Posts: 38 |
It is fibre glass. Was a very tricky job. Had to cut away the body panel to get to do the required welding around the seatbelt mounting point. Rebuild the whole of the underneath of the car whilst we were at it, rebonded the bodywork and then a full respray. Quite a job! Also refurbed the alloys, repaired some small accident damage, sorted out the sagging doors (common prob on Alpines) and replaced arial. Front wheel arch is prone to corrosion. From inside. Pretty rotten! This was the next car up after mine with a similar problem underneath!
|
|
|
|
Joined: Aug 2008
Posts: 6,644
Keep It Real !! Wiki Guide
|
Keep It Real !! Wiki Guide
Joined: Aug 2008
Posts: 6,644 |
yerrr some very cool work I like welding have been knowing to weld for 12 hours none stop
|
|
|
Click to View Topic.
|
|
Posts: 2,354
Joined: April 2009
|
|
There are no members with birthdays on this day. |
|
|
|