Forums65
Topics76,361
Posts1,033,316
Members14,581
|
Most Online16,551 Feb 2nd, 2024
|
|
9 members (2 invisible),
10,067
guests, and
432
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
M |
T |
W |
T |
F |
S |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
Joined: Nov 2003
Posts: 12,002
Wiki Master
|
Wiki Master
Joined: Nov 2003
Posts: 12,002 |
...the rear is easy, the front is the tricky end, there is an upper and lower arm on the EGs (and most Hondas) and there is very little room to get the strut out as there is also a fork that goes each side of the drive shaft. Ive had to rebuild the CVs twice due to streching them too much
What If There Were No Hypothetical Questions?
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
thats why I started with the rear Stu, cus I knew it would be easier, just made more difficult by all the bolts being rusted
had to take the upper arm off to get the lower arm low enough to get the strut out
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
Sean, see if you can get a 1/2" 14mm socket
|
|
|
|
Joined: Oct 2006
Posts: 2,667
Forum Master
|
OP
Forum Master
Joined: Oct 2006
Posts: 2,667 |
Got one of each sitting here mate
|
|
|
|
Joined: Nov 2003
Posts: 12,002
Wiki Master
|
Wiki Master
Joined: Nov 2003
Posts: 12,002 |
IIRC 1/2" is 13mm and wont fit....
If they are tight you deffo need a snug fitting 14mm - a ring spanner may be better - so you dont round the nut off...
What If There Were No Hypothetical Questions?
|
|
|
|
Joined: Apr 2006
Posts: 12,369 Likes: 1
Wiki Master
|
Wiki Master
Joined: Apr 2006
Posts: 12,369 Likes: 1 |
1/2" 14mm socket means 14mm for the nut/bolt on one side and the other side is 1/2" for the bar/rachet
|
|
|
|
Joined: Oct 2006
Posts: 2,667
Forum Master
|
OP
Forum Master
Joined: Oct 2006
Posts: 2,667 |
Well took about 2 hours but i got the front right one done lol, So thats 2 down 2 to go Riding on the piss now tho haha
|
|
|
|
Joined: Oct 2006
Posts: 2,667
Forum Master
|
OP
Forum Master
Joined: Oct 2006
Posts: 2,667 |
3 down, one to go Did the front one all by myself today, Well happy with myself haha Pics are in my MMC topic
|
|
|
Click to View Topic.
|
|
Posts: 14,351
Joined: July 2008
|
|
There are no members with birthdays on this day. |
|
|
|