Plate glass mirror - 3rd Apr 2009 8:10pm
Redecorating and it has to go
Approx 42 x 42 " and estimate 7mm thick plate glass mirror with a 15mm edge bevel. Drilled with 4 holes for mounting on a wall. Silvering is sound all over except for a couple of mm in places at the very edge.
I intended to have a frame made that would then make it look a bit more modern and would hide the minor silvering marks at the edge - but I know, I just know I will never get "aroundtuit". So, it has to go. Seems a shame to dumpt it at the tip
Can deliver local
Snod
Approx 42 x 42 " and estimate 7mm thick plate glass mirror with a 15mm edge bevel. Drilled with 4 holes for mounting on a wall. Silvering is sound all over except for a couple of mm in places at the very edge.
I intended to have a frame made that would then make it look a bit more modern and would hide the minor silvering marks at the edge - but I know, I just know I will never get "aroundtuit". So, it has to go. Seems a shame to dumpt it at the tip
Can deliver local
Snod