Hi what should i use to put my side skirts and arches on with.
I am only putting them on till the end of march and was woundereing if i should rivet em on or glue.
There for the si.
Sounds daft but use no more nails.
Or if you never want them to come off use tigerseal.
Also i would suggest putting some self tapping screws in either end of the sideskirts to hold them in place while the glue bonds. also its an extra measure should the glue fail.
Use rivits and a bit of builders expanding foam.
Dry fit the sills and drill a few holes for rivits, fill the sills with the foam (remember it expands 30 times), quickly put a few rivets in and let it expand.
The few revits will hold it while the foam expands and the foam, when hard will hold it secure and act like a glue.
Wouldnt putting rivets in wreck the smotth look of a bodykit. plus putting them in might destroy the fibreglass and crack it bits might fall off.
Can use a few self tappers.
Never harmed any kits i have fitted.
Could use some counter sunk rivits also.
tiger seal along,and self tappers at the edges,not sure how to stick the arches on,i'd just use tigerseal me
Windscreen bonding adhesive with some screws on the end caps
MMMMMMMMMM ALL GOOD IDEAS
But the si has gone.