golfy has a second hand big bore 2 peco which we bought him for his other car (metro) whats the chances of you weilding it on and how much fella?

CHEERS

Tony :go:

Every car is different and i need to check the bore sizes of the exhaust's, being of a metro it may be a small bore on the inlet therefore it may restrict the performance of the car. Also i need to see what level of corrosion is on both the exhisting exhaust and on the Peco as we can only weld onto good metal. <img border="0" alt="[cwcool]" title="" src="graemlins/cwemotions049.gif" />

<img border="0" alt="[cwhelp]" title="" src="graemlins/cwemotions041.gif" /> Short answer to your question is YES Scooby can do it, if i couldnt i shouldnt be doing what i do, <img border="0" alt="[cwlmao]" title="" src="graemlins/cwemotions042.gif" /> Cost approx £40 ish depending on what pipework i need to use. I meed to evaluate the vehicle on the ramp at work mate, No charge obviously for that......

Cheers for the input scooby i will try and get the peco and golf down to you matey :go: :go: