Picked my car up today and its a bargain (sort of)
Got the car with 10months 2 months tax but it does need the engine sorting couple of little problems
Starter motor and for some reason it stalls from time to time i think this maybe due to the dump valve (or so i have been told)
Rights its a red 200 sx s13 facelift
17inch fox alloys
dump valve
full stanless exhaust
air filter of what make i havnt checked.
Not going to go over board on it and will be doing other bits 1st.
Before anybodys says YES it need dropping.
Pulls well and sounds great looking forward to playing with it proper soon.
Very nice matey
Think I may even have a spare starter
Stalling could be the DV if it not a piston type, or it could be a sticky AAC valve
Both are very easy to sort
Thought you might know i will buy it stu got the money here what else is in your 200 shop.
Also got front and back struts and a laxy eye kit for it but not sure if i like the kit will have to have a look.
Will have to have a hunt round and see what bits I still have kicking round for the CA motor.
If I havnt got a starter, fairly sure I know someone local who has
Made up for ya tone, not sure if i could live with an S13 any more as their either
a)expensive to buy but will last u years
b)cheap to buy but will need rust and bottom end sorting which makes em expensive
Still absolutely lovely cars to look at. Give her some TLC and you'll have a winner. Spoiler REALLY isnt to my taste. Other than that, a perfect base
Taking that off matey its horrible boots alittle faded aswell but this has had new sills and there arches ok but they will be done when i sort the engine.
Stu were/who is the best person/s to get a engine for my car and fit it.
Its knocking but for the price of the car (cos its a facelift) i didnt mind getting it like it is still drives well should i put it on the rolling road though thats the question.
Just drove past this now and knew it had to be yours, looked a good buy. You'll have to take us out in it one day since its been awhile since we had a chat anyway
Originally posted by tupac:
Stu were/who is the best person/s to get a engine for my car and fit it.
Really depends how badly its knocking
Sometimes you can get away with just shells if it not to bad, sometimes a crank regrind, and sometimes a new crank
Only person Id take the car to is Neil at Park Garage (Hes had plenty of experience with my old one
) Hes not a big fan of regrinding cranks, but I did it to my old one and its still running to this day - guess you get good ones and bad ones
Only way to be 100% sure is a new crank, but that costs ££££, maybe worth looking at the shells and doing some DIY if it looks like you may get away with just replacing them before the expense of removing the engine to deal with the crank
Thats a Mongoose exhaust too btw
what can i say mate, totally amazing, thanks for the spin even though we had to bump start it, lol
great bargin mate
At long last. made up for ya mate. you have been so patient waiting for the right one to come up at the right price. looks like its paid off shame about the minor faults but you dont mind getting your hands dirty so should be cheap to fix.
Originally posted by Dazza:
Just drove past this now and knew it had to be yours, looked a good buy. You'll have to take us out in it one day since its been awhile since we had a chat anyway
Once its running proper mate will do.
I need a smaller steering wheel dont like this one Also did the lsd test and its got one wasnt sure if it did but it has.
Stu can you give me the number of the person which did your old car or can you tell me were it is and i will go and get it looked at on thursday cheers matey.
U like ur small steering wheels dont ya tone,i remember the one in ur E30,that was a joke,i was hitting the stalks trying to catch the damn thing. Whats the LSD test involve? AFAIK all facelift models have LSDs dont they?
Get the bottom end sorted ASAP mate before u damage ur crank
Jack the backend up and spin 1 wheel and the other should spin the same way.
As far as i know all facelift models do but i was told all a reg xr4i's had a lsd and they dont.
But stu told me they had but still wanted to check as the lad who owne it last could of sold it or it may have been shafted.
i have a momo champion wheel for sale if u wanna buy it. lookin for about 60 will post pics on thursday if u want?
I chuck the pics up matey. Looking to get the engine done before i go buying stuff but could be tempted.
Put the front strut on tonight will need to kut under the bonnet alittle so the bonnet sits proper but think it looks godd and should stiffen the car up abit.
Going to do the back one 2mora and maybe the lazy eye kit.
Looking good
Do you know what type of DV you need? Just I have a baily one you could lend until you get your own, but I think its a single piston type
right,i aint massively up on dump valves but im sure u plumb it in on a nipple at the foreward part of the plenum on CA18s . maybe stuy can enhance on this?
It already has a DV, but of the wrong type so it effects the idle on the engine and makes it stall at times
Could try is a supose. Think it has to be a piston type not sure if its one or 2 piston.
Come round some time and i'll dig it out and we'll try it. Failing that I'll find something to blank it off so you can have it chatter for abit until you source one <--- Nice sounding and wont stall on you, your not running silly PSI so it wont damage a thing
Heres where everyone plumbs there dump valves in CA18DETs, a lot of replies to dump valve problems on SXOC are answered "is ur DV plumbed in ok on THIS nipple"
FRONT AND BACK STRUT BRACES ARE BOTH IN NOW.
Front one took alittle messing about had to cut alittle bit of the bonnet skin away to make it sit proper.
Rear one was straight forward and took ten mins.
Had a go at the lazy eye kit but not to sure how to do it i have the instructions but carnt seem to work it out right.
Next is the engine and my mate has given me a great quote for the paint which should look good but its engine work 1st.
looks great mate i will defo be out soon and catch up with every one and there new cars.
really nice mate
Took the car out tonight for the 1st time in the wet and i have never had a car go sideways so easy.
Plus its so easy to hold no wounder they are used for drifting BRILLIANT
Need to sort the engine so i can play proper.
Also can sombody show me how to fit my sleepy eye kit
car looks like a bargain mate
At the moment it is but only time will tell.
Its great fun loving it.
can't get picks on comp as me phone won't let me. think it is the same as stu's sx wheel
DV looks like a diaphram one to me
, could be wrong though.
DV vac feed can be from any pressure source
after the throttle butterfly
Originally posted by StuyMac:
DV looks like a diaphram one to me , could be wrong though.
DV vac feed can be from any pressure source [b]after the throttle butterfly
[/b]
Is this a crap one stu.
What type would you rec i get i do want a DV.
Also how easy are quick shifts to fit????.
Taking the car to park garage 2mora to find out what i should do with the engine already on the look out for a new one found one on sxoc for £800 stage 2 but its in Devon.
Ive just removed a Blitz BOV from mine, complete with hot pipe, which Ill prolly end up selling as theres no where to easily locate it with the new intercooler
Short shifters are fairly easy to fit, just a bit fiddly - did you go for the OBX or B&M?
Originally posted by StuyMac:
Ive just removed a Blitz BOV from mine, complete with hot pipe, which Ill prolly end up selling as theres no where to easily locate it with the new intercooler
Short shifters are fairly easy to fit, just a bit fiddly - did you go for the OBX or B&M? How much stu.
Havnt ordered one yet which is best i know very little about jap cars at the moment.
Again thanks Stu took my car the garage you said and its just the tappets thank ****.
Not sad mate it looks smart espeially after you washed it
I have been told i can get 250 brake by doing this anybody know how true this is comes from the sxoc website.
250hp can comfortably be had for a 2nd hand s14 T28 ~£150-200, HD stage2 ~£100, volvo fmic £?? (cheap) and a shiny new walbro £80, plus filter & dawes device boost controller. I have that and the same exhaust and get 228 at 1bar. Say about £500 all in, maybe less depending on your bargain finding skills.
Its true matey
Though Id stick some cooler plugs in there as well
Originally posted by StuyMac:
Its true matey
Though Id stick some cooler plugs in there as well Cheers stu will be buying it little bit at a time.
Atlast i have fitted my lazy eye kit.
Thanks to scooby and chris bmw m3 for there help.
Took my 10mins to do and that drilling and fitting the switch inside the car only thing i have to do now is find what high looks best.
What do you all think.
if you just nock the switch a little bit and have them very low it looks good.
at last you got there in the end.
The top one looks best mate.Try loads of different settings as there may be better ones that that.but that top pic looks ace
AT LAST I HAVE A STARTER MOTOR.
Got my starter motor so will be fitting it 2mora also i maybe getting the car sprayed earlier than expected so things are looking up.
Looking at buying a kit for it but not sure what to buy and also should i go with a big wing or none at all????
Starter motor is on and car starts without a push GET IN THERE.
Just need to the blow off valve off stu and the car will be running fine just need to start saving for the body kit.
I have bought a spoiler for my car which i will get pics of soon not sure if i really want to put it on though
Also i have got my bodykit (sort of) just sorting out a deal this is it what do you think.
front bumper back bumper sideskirts and drift wings.( not in pic)
Looks cool kit mate top lazy eye pic the best hope you at meet tonight
Kit looks nice tone,i say leave it spoilerless,or get an ally or carbon wing (just cos it screams drift (NOT on saxos tho))
By "drift wings" were u referring to "canards" on the front bumper?
like these
No scoop matey these are them
Click Me And the spoiler is carbon jobby
are those drift wings fibreglass?
Scoop Not sure matey.
The kits mine all in front bumper/bonnet/skirts and wings for £670 will have it in around a month or 2 as i needto put some pennies away.
Looks like i will have to put the spray job on hold while i save.
Just done a deal to buy some KYB AGX Adjustable Dampers with Apex Springs these are about a 50mm drop and the Dampers are ment to be verygood.
Things are moving alittle fast on the moding front just means i have to work more hours in work
Found a pic of a drift 200sx (s13) with the spoiler i have bought and it looked great so will be putting it on now.
I have been offered this buy the same guy who made my strut braces what do you think??
Its bigger then the one i have bought i think.
Not sure bout that mate would need more pics at difrent angles
Also i have been told by the same person that a quickshift will fit both the s13 and s14 not sure if thats true he seems to think so any clues.
This is the one i have bought.
click me Steve have to agree with you there matey looking at both spoilers think i have bought the right one.
Just missed out on a lower strut brace on ebay because i forgot to bid again
Which short shifter would be best.
shifter 1 shifter 2
top shifter looks a bit better,second ones suspiciously cheap and if it comes with the black plate in the pic its gotta be one cheap plate
The 2nd one is the one stu bought for his 180 and it feels realy tight but not sure if it will fit mine.
Also pics of the spoiler front ish and back
Think i will stick with what i have.
Do need advice on the short shifters if they will fit cheers peps.
The second shifter is the better of the 2. The first is an OBX copy, and the second a B&M copy which is far superior - just make sure it fits the CA gearbox
I have just sent off my deposit for my 6 point roll cage with removable diagonal.
roll cage click me then Its going to be a slow one as the company are letting me pay bit at a time and the final prise is £610 delivered so think this is going to be after xmas.
I geta recipt everytime i make payment both by snail mail(post) and also by email so i wont be ripped off also the company is a known one.
think the spoiler will give the car a chav apeal shud keep it how it is u dont want to much down force on the back wheals
Yer sort of thinking that myself but a i am going for the drift look.
And maybe doing abit of drifting and trackdays it will be needed.
I may buy a 2nd boot so i can swap it around if needed.
Tried getting some pics of my light in the dark sad i know.
how can you drive at night? the drift look should suit this car well, hope your not getting an over the top body kit? something subtle or that goes with the lines of the car, low big shiny wheels, then your sorted........................looks wise! what you aiming for pwoer wise?
Power 250bhp but i bet i want more once i get used to it.
Wheels r going black and the bodykit is a looks almost the same as stu macs.
Driving at night is easy street lights LOL turn them up full when i cant see proper.
Just moved the reg plate down from the middle of the bumper to the bottom and i think it looks well better.
Also going to give it a verygood clean cos i am bored.
looks well better down there now. gunna get the holes filled in?
How does the lazy eye kit work?
do they come up from the lowered position to that height when u turn em on? and can u override it to take them fully up? or vice versa? or do u have to wind em?
Originally posted by BeemerRacer28:
looks well better down there now. gunna get the holes filled in?
Might colour them in as i am getting a new bodykit before the end of the year.
Scoop works on a toggle switch if the switch is on i can set the lights to what high i want them need to turn the lights on 1st before i can do it though.
It starts from the up position and works its way down when i hold the switch on.
Or i can turn the switch on 1st and then turn on the lights so i just have sidelights on which is somthing the car never came with it was lights up or nothing.
Gave the car a verygood clean today inside and out
Gave the wheels a verygood scrub look almost new
By 2mora i should have fingers crossed the blow off valve and hot pipe and a new steering wheel.
This is the kit i am getting. Its fitted on a drift car the front wings are the say as i am getting aswell.
Would like the spoiler but dont think i am that brave.
I'm a bit unsure on the spoiler too matey, it'd be daring! but that kit is swish! =)
cars lookin nice mate. kit looks nice too.
personally, i like the look of the spoiler
that spoiler on the green car SCREAMS drifter,and only a drift look car can pull it off. But without the spoiler u can still achieve the drift look
spoilerless i think is the way to go with your car imho.
got my blow off valve and stu fitted it sounds alot better than the dumpvalve not as loud but better.
The engine is running right now aswell not trying to stall all the time.
Cheers stu matey :cheers:
trusty bit of wood untill i get the hoses.
Blow off valve i can make it loder if i like will have a play 2mora.
Also bought i nice steering wheel and getting the back windows done 2mora.
Had my windows tinted
Like the look of them will go well with the black look i want with the car.
Only took about 90mins to do verygood company just waiting for the tints to settle in but happy with the result.
Go check there website out and phone for a quote.
www.tintwizard.co.uk tel Ian on 0151 545 1080
Mobile on 07980 63 65 70
looks very nice and subtle. Your car will look totaly amazing with the kit. You going for car of the year lol. Could be a close one maybe between you and lawton if ya get the kit lol.
Originally posted by Johnny Alan:
looks very nice and subtle. Your car will look totaly amazing with the kit. You going for car of the year lol. Could be a close one maybe between you and lawton if ya get the kit lol.
Flatterd matey but Lawton has done ALOT more than me maybe nextyear.
Sean cheers matey good pics them from a mobile.
Must admit i love the look of the car with the windows done just looking forward to getting th kit on and dusted.
Spoilers on its way and should have the push button start soon.
This is my spoiler mine has alittle more curve in it than that but its the same model.
Still alittle unsure if i want it on or not.
thats gona look amazin! love the drift look so much.
Originally posted by Scotty69:
thats gona look amazin! love the drift look so much.
Cheers matey thats the look i am going for but nectyear i will be having ago of the euro drift come once i get a couple of drift lessons from the driftuk boys.
Gutted the fella who was selling me my shocks and springs has let me down
Looks like i will have to get springs for now while i save for d2 coilovers.
Been told my spoiler and push button start are both on there way.
Also by the time the meet comes around (aug 10th) my wheels should have been done.
Also going to order fingers crossed a snap off boss to go with the new steering wheel i have got.
I don't like the spoiler that you are getting, think it looks a little halfordstastic IMO.
Probs look better if you are putting graphics on the car?
Originally posted by AX_125:
I don't like the spoiler that you are getting, think it looks a little halfordstastic IMO.
Probs look better if you are putting graphics on the car?
not keen on it myself, but it'd look good with graphics on
Originally posted by BeemerRacer28:
Originally posted by AX_125:
[b] I don't like the spoiler that you are getting, think it looks a little halfordstastic IMO.
Probs look better if you are putting graphics on the car?
not keen on it myself, but it'd look good with graphics on [/b]I have to agree with you both on that.
Once the bodykit and graphics are on it will all come together.
Cheers peps.
Been alittle bizzy today and started my wheels.
RUBBED DOWN READY TO PRIM
PRIMED AND READY TO PAINT
PAINTED THIS IS ONLY ITS 1DT COAT NEED MORE YET
Note totaly happy with the 1st wheel might have to do it again but it will do now as i am buying new wheels after christmas but will do for now.
1 down 3 to go which will get done 2mora as i am inwork later.
why not totally happy? how many coats of paint + laquer u putting on?
remember to flat with fine wet and dry (wet) before putting the laquer on
Originally posted by BeemerRacer28:
why not totally happy? how many coats of paint + laquer u putting on?
HAVNT RUBBED IT DOWN PROPER AND I AM VERY FUSSY.
But these wheels are only staying on till after christmas so not that bothered will sort it out though.
Hoping to have the other 3 done 2mora as i am off.
Cheers scoop but this is my 7 set of wheels i have sprayed (not that you would think looking at the state of the 1st one.
Spoiler has arrived and sort of messured it up (hasnt got the stands on it will sit higher by 20cm)
Also done 2 of the wheels and if i am honest i like the black on the car goes well and is what i am looking for but the finish on the wheels is nothing short of SHITE.
I will do others but when the car goes for its 1st lot of spraying at the end of sept i will get them done propley.
Looks ok for now.
wheels look great mate, shame it isnt lowered.
when u getting springs and coilovers?
All 4 wheels are done now.
Joe and of the month the other springs n shocks that i was getting the fella kept messing me about so getting apex ones not going for coilovers just yet.
The black wheels defo make the car stand out pitty i am
FAR FROM HAPPY with the job i have done.
bloody hel mate didnt waste anytime gettin them up did ya lol. looking good mate shame your not happy with them tho
One of the peps of the sxoc has photo chopped the car carnt wait till its lowered look well good.
Click Me
superb, red black and carbon are a good colour combination! got anything else getting the black or carbon treatment?
Originally posted by steveobennet:
superb, red black and carbon are a good colour combination! got anything else getting the black or carbon treatment?
YEP got a carbon spoiler. Also bonnet boot and roof are all going black at the end of sept.
Cheers matey
Pushbutton start arrived today not sure if i want it on show or hid it looks good.
I am going to need help fitting it as i have no idea when it comes to anything electric.
Any takers PLEASE
Took some better pics of the car today as i dont think the others do it justice.
Gutted went to the place were i try my drifting and it a building site now.
So i went to another pace i know got the land owners permision but it was just far to grippy and he wasnt happy with the noise boooooooooooooo
Did a little vid as soon as i had it sidways before the corner i just got grip and went back straight then i was to slow into the corner and not enough power on 215 tyres.
Only got one shot at it as the fella who's land it was wanted to hear how much tyre noise there was.
PLUS I WAS CRAP
Would he let u do it again?
Think so maybe if its wet.
The fella who said i could use the land seemed alittle unsure of what i was doing.
But nectime i may go on a sunday as they will be closed and i can play for free so to speak.
fill your car full of tubs of water, empty them on the land then off you go! autunm is coming soon which means plenty of rain and slippery surfaces! the perfect time to practice
looking slick mate, i'm quite impressed with the fluency of the progress with this car, its coming along fast and stylish.
and as noted above. were leaving summer now boys, this be drift season.
lookin good matey you gonna have to take me out driftin sometime i tried it but am crap not sure if its coz mine 4wd but it just sticks too much
Originally posted by subaru steve:
lookin good matey you gonna have to take me out driftin sometime i tried it but am crap not sure if its coz mine 4wd but it just sticks too much
thats a promise matey.
Right dont know if this is going to work but tried drifting in the newpace where i have been given permision to drift.
SMALL AND CRAP VIDEO.
<a href='http://www.putfile.com'>Upload at Putfile</a>
Upload at Putfile Maybe this one not sure on what to do scoop loaded it for me.
just found this pic mate, i think you should jus spray your roof and bonnet black
that 200 looks amazing
that one looks nice,bar the wheels. Tupac,whats the title of the video,ill get the link up
Scoop dont know
Want to hole lot done as it different i promise you it looks good.
love the black wheels mate, will look ten times better when its lowered
Originally posted by lawton:
love the black wheels mate, will look ten times better when its lowered
Cheers matey might have coilovers by the end of the month just waiting for the fella to get back to me.
Still havnt done the start button worried i will mess it up so going to wait till sombody who has a idea of what to do can help me.
Also bought a quickshift just waiting for it to arrive.
when u next going to ur drifting locantion give me a pm an ill pop
Originally posted by red20:
when u next going to ur drifting locantion give me a pm an ill pop
Will do matey will do.
I have them atlast
COILOVERS Picked them up today from Mansfield about 5mins from where i bought the car from.
The house where the fella lived is everybodys car lovers dream pulled upto the gates and down a rather nice drive and turned into a courtyard to be greeted by 2 skylines 1 prelude 1 verywell kitted supra twin turbo running 650bhp (never seen it go though) 1
very very nice 180sx (drift speck fully stripped and sorted) And his daily runner a black amg slk with black alloys and tints
WHY HAVNT I GOT THAT MUCH MONEY.
Only got a pic as the fella was abit big and didnt fancy getting battered.
Anyways back on topic.
Will be fitting these this month along with the HKS turbo timer and quickshift that i have bought this month.
Next in the pipeline if i can sort out a good price with the fella is a volvo FMIC stage 1 chip boost controller and boost gauge.
Not sure what power thats going to give me but i will be needing a new fuel pump me thinks.
Very nice he seem a bit on the filthy rich side lol. Those shocks seem to be in good condition. When you going to fit them? Will it lower your car much??
VERYRICH MATEY.
Will be fitting them this week there coilovers matey so should be able to go verylow carnt wait cars really starting to take shape now.
thats feckin low that!
gotta watch you dont loose your number plate goin too fast
Originally posted by BeemerRacer28:
thats feckin low that!
gotta watch you dont loose your number plate goin too fast It will be off verysoon i bet.
Took the car for a run and found a couple of probs 1st its that low the the pastic that covers the underside of the engine rubs on the floor from time to time so thats comming off.
Right anti roll bars come loose needs a new one and there is knocking from the left side of the car think its the spring will have a look 2mora when i have some light.
Also the anti lock brake lights on????????? whys that?????
Corners so much better and is far easier to hold once the backends out love it.
Think i need to invest in some spacers aswell.
Originally posted by tupac:
Originally posted by BeemerRacer28:
[b] thats feckin low that!
gotta watch you dont loose your number plate goin too fast
It will be off verysoon i bet.
Took the car for a run and found a couple of probs 1st its that low the the pastic that covers the underside of the engine rubs on the floor from time to time so thats comming off.
Right anti roll bars come loose needs a new one and there is knocking from the left side of the car think its the spring will have a look 2mora when i have some light.
Also the anti lock brake lights on????????? whys that?????
Corners so much better and is far easier to hold once the backends out love it.
Think i need to invest in some spacers aswell. [/b]Did all this any even managed to sort out some standard alloys too picking them up at the end of the month.
Going to the jap show on Oct 7-8th for a rwyb weekend then wont be buying anything till after xmas as i am fastly running out of cash.
Then it will be rollcage bodykit and engine mods.
Originally posted by tupac:
Originally posted by BeemerRacer28:
[b] thats feckin low that!
gotta watch you dont loose your number plate goin too fast
1st its that low the the pastic that covers the underside of the engine rubs on the floor from time to time so thats comming off.
. [/b]thats it get rid of the problem instead of fighting it
nice on mate, i can still see the top of the tyres so its not low enough, lol,
looks well nice mate lovin it!
Cheer peps its going to go lower at the back.
Need alittle help these are the two kits i am looking at the spoiler is the one i have bought just need to pick a kit any idea's.
The rear bumpers are the sdame on both kits by the way.
Originally posted by tupac:
Cheer peps its going to go lower at the back.
If you go lower, consider some adjustable camber arms - even -35mm really scrubs the inside edge of the tyres so even lower on coilovers is really goning to mess the rear camber up.
Also pay good money for branded ones, Ive heard that the cheap ones
do snap
Top Kit in the pictures
What a transformation that will make.
Looking good fella
Didnt take long.
THE REG-PLATE CAME OFF ON ONE OF THE SPEED BUMPS IN MY ROAD Knew it would take long.
Going to have to stick it back on but alittle higher up LOL.
Also i have been getting a knocking noise over bumps from the left side of the car any ideas think its the bottom ball joint any ideas????
Also took the plastic cover off so there is no rubbing.
Stu my wheels arent as wide as your so there is no rubbing at all matey PHEW.
lol, not surprised really mate, as your road is a no go for me as mine is too low
Originally posted by tupac:
Cheer peps its going to go lower at the back.
Need alittle help these are the two kits i am looking at the spoiler is the one i have bought just need to pick a kit any idea's.
The rear bumpers are the sdame on both kits by the way.
I'll say go for the bottom one, i looked at the shape of the car n its curvy n matches the bottom pic! n the ova ones in abit of a mad shape
Looks like its going to be the bottom one then (cheapest one too)
Got my turbo timer on weds just need to fit it along with my push button start.
Also depending on how well the 4i sells will have bucket seats.
ye defo go for the bottom bodykit, looks a bit more drift than the top one, the top one looks more showy than drift. lookin good.
Originally posted by tupac:
Got my turbo timer on weds just need to fit it along with my push button start.
Also depending on how well the 4i sells will have bucket seats.
Think Adam has a decent pair of buckets he needs rid of, and I dont think he wants that much for them either
lol
As for the tubby timer, get a
harness and Ill give you a hand
Cheers stu will get one soon.
Might of sorted some bucket seats out matey.
Took some better pics of the car today since its been lowered.
Think the bottom one looks great.
Been to Newcastle this weekend MAN.
Pic to prove.
I now know the car runs well and quicker then i thought it would. But the coilovers and shitty motorway surfaces make for some hairy driving moments while going along at 70mph ????
still waiting for my quickshift Getting abit pissed off now with the fella.
Also waiting on my boss which i bought from apex.
Need to sort out the suspension and i am saving up to buy whiteline antirolls bars and some nismo bottom arms for the car as the car needs newones so i may aswell upgrade.
Oh and 50mph and driftlock is very scary as i found out while some idiot in a crx wanted to race me in the wet.
Had a friend look the suspension over as i am getting knocks over everybump and its getting worse.
Need 2 new arms as the ball joint on one side has gone and on the other the antiroll bar joint thing (will show you the pic) is buggered so might aswell upgrade just a little srapped for cash this month.
click me And these too Also fitted the new steering wheel feels alot better than the old one nice size too.
cant beleve the price of them bottom arms i paid £140 for one of nissan
looking good there well have to meet up an go some where to practice some sideways action
Should have them this month as long as the fella who has bought the xr4i dosnt mess me about.
Red20 had a little play this morning taking the girlfriend to work (she hates it
)
Going to lower the back alittle more today, Also ordered my harness for the TT and will try and fit my short shifter this week too.
yer its ok in the wet i had a play last night around mine there are a few nice round abouts to play on
Just bought this
click me on my way to stage one
Coming on matey
Just sent you a PM about the whiteline anti rollbars - gimme a ring when you can
yes red 20 the round a bouts are meant to go round at a safe speed not arse first!!!! i experienced your donuts and no i was not impressd!!!!!
Originally posted by xhotchick2005x:
yes red 20 the round a bouts are meant to go round at a safe speed not arse first!!!! i experienced your donuts and no i was not impressd!!!!!
lol, you love it really
AT LAST STANDARD ALLOYS LOOKS LIKE ITS DRIFT TIME Only cost £25 need s good clean but should do me for track and drift days (if i ever get round to doing any
)
Got some more alloys today only 195's so nice and thin.
I now have 10 alloys wheels to drift with The facelift ones 205/60/15's will be getting fitted with slicks so they can go on the front and the 195/60/15's wil just get what ever cheap tyres there are LOL.
PS CHEACK OUT THE CONES USED FOR PRACTICE LOL 1st and only time i got the 4i and 200 together GUTTED Will buy another 4i maybe after the wedding but will cheat and buy a 24v converted one.
I should hopfully have this little lot fitted this month if all goes well.
HKS TURBO TIMER
PUSH BUTTON START
QUICKSHIFT
AND WALBRO FUEL PUMP.
And by the end of the month the car should be black and red with the spoiler on.
sounds good matey, nice to see progress is gettin made
u gunna have to work a lot of overtime again for the spray jobby? lol
nice! so this was on a closed pice of private land u say
Yep
tupac was that good at the drifting he even had one hand free doing a westside big up with this hand as u can see in the pic
tupac was that good at the drifting he even had one hand free doing a westside big up with this hand as u can see in the pic
Thats cos i have all the game PLAYER
Enjoyed it will have to do it again but in the wet (little less noise from the tyres)
Lowered the car some more today
Its as low as i can get it as i have speed bumps in my road (large ones)
looks alot better than it used to
So you decided you werent tired then?
Looking better
So you decided you werent tired then?
Looking better
I thought i best pull my finger out and do some work on it
Looks alot better i think also has a fair bit of camber now on the back wheels.
Its going the body show weds to have the spoiler done not sure yet if i want the roof and bonnet doing yet as i am thinking of buying a carbon bonnet after xmas.
This is what the spoiler will look like once its on the car.
Not going to be to everybodys taste but its mine anyways.
that'll look top that mate
get a carbon bonnet, go on, make me jealous lol
the spoiler doesn't look to ott, i say wait for a carbon bonnet nad just get the roof done! are you sorting out the camber on the rear with some adjustable brackets, or are you happy going through tyres faster? lol
Will be buying these nextyear.
click me
looking good there have to give me a pm so we can meet up an get some new drifting pics
lookin good m8 an a like that spoller
Cheers peps think once the spoilers on i will like it.
Should be buying a stage one chip nextmonth so on the look out for a boost controller.
Shaun will pm you nextime i go out to play.
Pm me your mobile matey OH and sorry matey wasnt on msn it was the misses.
Got the car back today from having the spoiler and boot done.
Looks verynice i think.
Will get some better pics 2mora.
Goes back at the end of the month for its bonnet and roof doing then i will get the kit on it after xmas.
Not sure if i wan the side bits of the spoiler on.
lookin good m8 should look good wid the roof an bonet done aswell
Sweet! I think you should try it with the side bits on the spoiler though.
looks well smart
Sweet! I think you should try it with the side bits on the spoiler though.
I agree
Will do just need to find the bits to put em in with seem to have lost them.
looks gud mate it really crying out for that kit you posted, keep up the gud work making really quick progress
Looks sweet as fook that Tupac, so streamlined and co-ordinated!
looking good tony, looking foward to seein the roof and bonnet done
keep up the work mate
looks gud mate it really crying out for that kit you posted, keep up the gud work making really quick progress
Hopfully i'll have it bought and fitted by the end of march but i do have a mot inbetween then.
Matty c and cor7a cheers peps.
The car hasnt been given the thumbs up on all sites but who gives a fook i like it.
trampdrift gave me a bit of stick but then the name says it all doesnt it.
Why don't they like it? Too rice or something? I think you can be pretty sure everyone here loves it, I know it's in the running for my vote in car of the year
Spoiler isnt really my cuppa tea matey
, but each to their own
Should be around most of the weekend if you want me to have a look at the quickshift, fuel pump and turbo timer
I am fitting the kitchen and plastering sunday which is my only day off RRRRRRRRRRRRRRRRRRRR
Will sort a day matey but cheers.
Done oil change on the car today and some stuff in it to see if i could cheat with the tappets.
The old oil in the car was the blackest i have everseen come out of a car very dirty plus it was verythin so i think there could be some internal damage somwere looks like cheap shite was used for its last change
Will find out 2mora if the tappets are any quieter.
Also put the side bits on the spoiler and took them straight of i think it looks very tatty.
Booked the car in for its bonnet n boot for the 30th of Oct so should come back looking good to me on at the start of November.
I like ye spolier
Might have been decent oil, but the wrong grade. Are you sure you have the correct grade now? Just that your tappets will take better to a thinner oil rather than a thicker one (Am not suggesting anything, am talking in a fair case scenareo).
New oil/filter will always do the world of good, and I wouldnt worry about any internal damage unless its noticable.
10/40, semi synthetic
It needs to be thin for the turbo, but to thin on an old engine will cause problems.
15/40 in it stu got some advice of Apex. Seem tyo have worked the cars quiet now no tappet noise GET IN THERE.
Doing the quickshift on weds and the cars now getting sprayed on the 1st of november.
Was checking the sprint regs last night matey, if you want to sprint the car, your gonna have to remove the rear wing for the day - the scrutineers wont pass it in a road class!
Cheers stu its only on by acouple of bolts in the boot so shouldnt be to hard to remove.
The wing does help at speed i can now vouch for that lol.
Dont know if i want to fit the side slats to the car will put them on today so tell me what u think.
Also the cars not getting sprayed till later on in the year not sure why Alan carnt do it before but somthing has come up.
Atleast thats freed some money up for drifting on the 9th of Dec.
think it looks better without mate
try spinning the ends round 180degrees, might look better, if not then yea i reckon you go without too
I'm 50/50, but I think I favour with slightly more, but that 2nd pic makes them look out of place
The more i look at it the more i DONT like the sidebits looks takky so i think i will leave them off cheers peps.
I like it
Hey I saw this on Pistonheads and thought you might like to have a ganders!
http://www.pistonheads.com/gassing/topic.asp?t=299128&f=47&h=0Tom
Looks like what i want to do like it.
Wheels seem alittle small but its a good looking car.
top 3 for car of the year thankyou all I hope to have fitted this week turbo timer/push button start/ quick shift and uprated fuel pump.
Doing the kitchen on my house is killing anycar time i have so i dont get to play.
Oh and one other thing i am still after a 2nd driver for the drift day on the 9th of December
Still not sure weather to put the side slats on so i have put up a poll get voting peps.
Cheers webby.
The last pic is for clj85.
Bidding on this on ebay hoping to get it intime for the drift day but i am all most to my max bid.
click me
Be careful how high you go matey, these are only £120 new
I did the wrong thing n looked at the pic and thought it was for all the bits going to cancel my bid.
Checked at home for a std shifter mate, and Ive chucked them all out in the clearout I had a few weeks ago
Ill have a look round for a good fitting guide for the one you have though
This should be of mucho help matey
a)this pic is fantastic
b)submarines...fooking huuuge. Great place for a shoot mate
a)this pic is fantastic
b)submarines...fooking huuuge. Great place for a shoot mate
I scoop thats my fav pic too.
Cheers matey.
Wayhey! Nice one mate!
Cheers peps that was a bit of a shock.
Made up its not anywere close to how i want it looking and driving.
Got the uprated fuel pump in today big thanks to Dazza for doing it.
INSIDE THE TANK
TOP OF THE TANK
OLD FUELPUMP.
The cars running better and there isnt a rich smell that the old pump gave me as it was on its lastlegs.
All i need now is a chip and intercooler and i will be at stage one.
Not a problem, easier than on my Fiesta - I have to remove the tank to swap the pump lol.
Got a new knob for my its big
Also got the film from my rolling road.
189.02 at the flywheel
Oops, looks like this has caught the Car Of The Year Bug......
I will allow Tupac to explain in detail.
You ok Tony? Hows ur head?
Eeee Jay i waved and u didnt wave bk
Oops, looks like this has caught the Car Of The Year Bug......
I will allow Tupac to explain in detail.
HOW VERYTRUE
1ST of all thankyou so verymuch for your help Scooby.
Webby sorry carnt upload the pics.
After going out for a play i started to head of home when i hit OIL PATCH ON THE ROAD i span the car at no more than 20 mph into a kirb.
As you can prob guess the kirb won and broke my car.
front and rear hub carriers
front and rear bottom arms
trackrodend/control arm (not sure which it is)
rear wishbone
one front 17" wheel
PRIDE
Pics below if sombody can photo chop the pics with arrows to help i would be glad of it.
FRONT WHEEL ALSO AT ABOUT 5 DEGREES
REARWHEEL ALSO AT ABOUT 5 DEGREES
REAR BOTTOM ARM BENT
2ND PIC OF THE BEND
VERYBROKEN FRONT WHEEL BUT STILL HAS AIR AND CAN BE FIXED
FRONT BOTTOM ARM
Nevermind on the plus point i got my full go round (peps will know what i mean) TOOK ME AWHILE TO GET A FULL ONE THOUGH.
Gutted for u tone!
Atleast u got ye full go
U did really well last night woop!
What yu looking at to get this fixed ?
I mean parts, i guess the price tag will come later....
I thought you car was in bits when you called me??
Gutted for yu mate,
I guess the only consitlation is it could have
been a lot worse.
Just looking about the web now matey doesnt look like its going to be before xmas GUTTED.
No mark i was in bits
True though could have been much worse
ooo gutted
You should change your sig now....
"Sidways is the way forward unless you
go backwards hit a kerb"
ooo gutted
You should change your sig now....
"Sidways is the way forward unless you
go backwards hit a kerb"
Done matey
gutted mate
holy shit! only heard 2nite mate, i gave u a call earlier but didnt get a reply, hope ur ok
properly gutted for you!!
Unlucky mate
Still all the parts should be fairly easy to get hold of from the SXOC, and they shouldnt be to expensive either
Bought all the bits just need help if peps fancy it.
Check out car problems for the link
Managed to buy the bits of a guy breaking one on ebay for £60 most peps wanted 150 so a bit his hand off.
PArts should be here on monday then its a late nights for me as i need the car to be ready for Oulton park on sat the 9th for the drif day.
I am working till 8pm everyday this week GUTTED.
As you can see the front arm was very bent.
And the rearwheel hit the kirb alittle higher than i thought pitty its didnt hit on the tyre.
At last i have the parts i'll be at the garage all day n night then if anybody wants to help.
If all goes well i will defo be going sat.
The day the parts arrive has to be the day
of the worst weather.
Even London had a Tornado today...
Hope you can get it done mate,
Clocks ticking....
EMPTY GARAGE MEANS THE CARS DONE AT LAST.
Also this is the rear bottom arm (left ones the broken one rights the newone as you can see its verybent)
Once the cars back from Oulton park its going away as its in need of some tlc so you wont see much of it till about June i think.
Tupac Makes it too Oulton Park
Pictures from the Oulton Park Gallery
There are lots more...
And a little Video - But its not Tupac Driving
He insisted that you know that lol
Video More Videos and Images in the Review
Click Me
looks sweet tupac,NOTE,i can see those pics fine!
Car comes off the road 2mora so i can sort a couple of problems out.
Also just sent off my cheques for the body kit.
Pics of the rear will sort the front pics out soon.
Might also buy the rear qtr panels later on in the year
Nice, the full kit would look awesome.
thats georgeous matey, u should deffo go for the full kit
Right been looking about for a bonnet to go with the kit and i am buying.
I have found this
A carbon fibre one will cost more then the kit so i am hoping to get this made up what do you think.
As i hope to get alot of eurodrift practice done in 2007 i need somthing to help keep temps down so vents are important.
Here is the full kit i have bought.,
that'll look awesome mate biiiiiig
, wot bout the paint job, wot colour u thinkin of ??
Not sure yet.
I like the redish one in the pic or maybe go for purple.
should look good matey u still keepin the pop up lighs?
should look good matey u still keepin the pop up lighs?
I matey just to buy the bits to do the conversion is £1600 then i would need it spraying and if i have a bump on the track it would cost me a arm and a leg to fix.
Need some idea's on colour though.
go for bright pink like the sumo power 350Z!!
go for bright pink like the sumo power 350Z!!
Its been done matey thought of ink but found out alot of 200's are done like that.
Was thinking maybe candy red with the black roof/bonnet/boot its been done but on s14's mostly.
At last.
chuffed for ya mate,thats some control u've got there, backwards round the roundabout tho,dont approve of that part of it, its fine when ur doing it the right way lol
chuffed for ya mate,thats some control u've got there, backwards round the roundabout tho,dont approve of that part of it, its fine when ur doing it the right way lol
LOL Lucky its not used on a sunday matey thankgod.
I love that video,
the sound of the squeeky break and then the
quick footsteps as you run over too the camera
to switch it off...
Pure comedy...
Your so much better than I thought you were.
Your getting the hang of things there mate.
Keep up the practice when and where you can
I love that video,
the sound of the squeeky break and then the
quick footsteps as you run over too the camera
to switch it off...
Pure comedy...
Your so much better than I thought you were.
Your getting the hang of things there mate.
Keep up the practice when and where you can
Cheers webby going to make a little video once i get the car back so will be needing a hand if you fancy helping as my media windows dosnt work.
Got myself a cheap FMIC just need cleaning up abit than all i need is a chip for stage 1.
Cheers webby going to make a little video once i get the car back so will be needing a hand if you fancy helping as my media windows dosnt work.
Not a problem mate,
but i think the footsteps should be your signature
in your video's lol...
Good Drifting and a laugh at the end
Never bought the fmic as i have bought this instead.
click
thats much better tone, real nice
Never bought the fmic as i have bought this instead.
click
Never bought the fmic as i have bought this instead.
click OH dear who is gay enough to go find that
PS just bought that aswell
Never bought the fmic as i have bought this instead.
click This is what i really got
this car justs gets better and better....
this car justs gets better and better....
Cheers matey.
If all goes well i may just have a flocked dash at the end of the month just waiting for the fella to get back to me as the person buying it keeps messing him about.
sweet as foook.Hope u get it mate.Flocking is the shiznitch
My intercooler has landed at stansted so fingers crossed i'll have it by sat.
Got my fmic today little bigger than i thought but its nice will do what i want it to.
Hant heard back from the fella with the dash so i guess i am not getting that then.
Bought some samco coolent hoses today and will be picking up the smaller batt so i can get the fmic sorted as soon as i get my bonnet.
I have also been reading up on how to get more lock from my car so will be buying these verysoon
click
some good kit on that site.
Right been looking around for wheels and i have finally found the ones i really want.
If you look back through this topic you'll come across a green s13 this car has the wheels i want.
Looks like i may have to do the 5 stud conversion but it will be worth it and i'll have to start saving (hard) if i want them cos they are alittle expensive.
click What do you think i want them in white and the car will be red.
These wont be on the car untill maybe sept as there are a couple of things i want 1st but i will have a 2nd job soon which will be souly for money which i will be spending on the car.
WHAT A MUG I AM
yer get them 2pac cos i want them as well an i can jus rob yours lol
Well, mine didnt sell on flea bay, so Im open to offers on mine again - ideal for a 4-5stud conversion
lol
Also, the Rotas are only in 18" and at those widths they need a lot of arch work to fit
Looked in to them before I got mine, but they didnt do them in 17!!
can you get copies of these?
The Rota GTR's
are the copies of Nismo Wheels
The Rota GTR's
are the copies of Nismo Wheels
Been learning a far bit of late i i know this (get in there)
Also stu might not need arch work as i have a plan ??????
Stu we need to come to some sort of agreement over your wheels cos i have more going out than i have comming in at the moment dame car
I have been looking at these too alot like the one's i want.
click
Stu we need to come to some sort of agreement over your wheels cos i have more going out than i have comming in at the moment dame car
I have been looking at these too alot like the one's i want.
click
what about this shop, some good parts for your cars maybe?
http://www.japshop.co.uk/
Got my samco hose kit today £80 for 2 bits of pipe SHOCKER.
More for looks to go with the front mount than anything else but the old ones are looking alittle tired.
Also bought a boost gauge and a stanless bush for my steering.
seen you coming lol, mind you a 1.6 zetecs induction hose is 40quid.
are you using anymore hoses? if try these they maybe cheaper
http://www.siliconhoses.com/
Will add more later in the year matey i am trying not to go mad and do all the engine bay as i will end up wanting to keep it clean and spending most of my time cleaning it.
Putting my fmic on today and poss anything else in the long list of parts i have.
The morning hasnt started so well as when i got to my garage the car had a flat so i had to change the wheel and wouldnt you know it the car falls off the jack.
Hasnt broken anything but delayed me as i wanted to bring the car back to mine in the dark as its got no bonnet on it yet.
You dont half get some funny looks driving without a bonnet LOL.
As the car stands not fingers crossed it will look better later on.
Right alittle update on today.
Started badly got worse then a little better
Big thanks to Stuwells for his help.
As you can see bizzy with the grinder while i take photo's and have cups of tea.
Had to cut the batt try so i could get the piping down looks alittle messy but it will be sorted out propley before its all put together.
Removing the bumper was a pain in the arse as all the bolts were rounded off or kept snapping so i took the grinder ti them to save time as it was starting to get alittle dark.
This is how the car looks at the moment will crack back on with it as soon as i get time.
Do you need to trim the bumper bar up with this kit, or will it fit under it?
Not sure stu havnt got that far yet.
Hope not as the cars in the garage now and there isnt any power there.
Will be going back down prob nextweek as i have acouple of things to do 2mora.
FIngers crossed it will be up n running soon as i am fedup of riding my bike.
Phoned you today as i was having troble with the bumper but a bad temper and a grinder did the trick
tony, it looks like you butchered your battery holder, i wish i knew you were doing this, i would of lent you my hole cutter :< oh well, lookin good any way
tony, it looks like you butchered your battery holder, i wish i knew you were doing this, i would of lent you my hole cutter :< oh well, lookin good any way
Got alittle happy with the grinder.
Thanks for the offer anyway the car wont be a show car so not to bothered how it looks under the bonnet aslong as it goes matey.
Come help me finish the frontmount if you like my garage is only round the corner from yours (unless i am wrong or you have moved)
lol, i ve moved to upton now, but still interested in helping in im not to busy, giz a ring tony 07840397441 when ever and i ll see if i can come.
Couple more pics.
Sanchez will do matey cheers.
Once fitted this is how the pipes and intercooler should look.
Bet mine dosnt
Put all the piping on today just need and the samco hoses.
Will put it all together once i get alittle more time.
Also put the boost gauge in the car.
Got as far as this before i noticed that i havnt got the bolts for the bracket which goes on the core so untill i find it i am stuck.
Carnt wait my kits ment to be here friday/sat so as soon as i have the cash it will be on the car sprayed.
Wont be having a full respray as yet as i am buying vented wings and prob a carbon bonnet but atleast i'll have a nice kit with a fat intercooler behind it.
Fmic is on (i think)
Just need to bits of hose becasue i havnt got one and the other doesnt fit right.
Been on the phone to Apex got the hoses and stuff i need so it will be running in week i hope.
cum on get back out on the road bonet or no bonet
cum on get back out on the road bonet or no bonet
Wish i could. Might have some new wheels aswell matey.
Wheels in question just waiting on price for delivery.
just read all 29 pages! Fookin amazing mate. nice one.
Cheers matey its getting there slowly.
I hate working to a budget.
Sorted the deal the alloys are mine.
Wheels in question just waiting on price for delivery.
These are the wheels.
hats off to you. I love the incar vids too!
hope to see you sideways soon!.
Bodykit has arrived will be fitting it once i have more cash and all the lights for it.
Also got the final bits for the fmic so that will be sorted soon.
And hoping to have the new wheels in a week or so.
That kits is gonna look sweet as fook matey, can't wait to see it on the car!
AS above
Dunno where your going to fit that chair ??
thirded,cant wait to see that kit on the car. is that the same front bumper stuys got??
Nice looking kit matey, whos is it?
Gonna have to watch all those speed bumps
Scoop, its not the same as mine, I have the genuine Nissan Kouki kit, this as an aftermarket jobbie which looks lower, front and rear - though the skirts appear to be copies of the ones I have
Cheers pepes.
Got it off a fella on driftworks called ghostrider he runs a skyline parts company and was given a kit from japan for his car.
As i posted on his topic that i liked the kit i he said he could get hold of one and here it is.
Going to see how it sits on the car this morning looks like a verylow kit to me so speed bumps are going to be a no no or a go slow.
Much lower than i thought it would be.
I'll prob have to take it off for drifdays as knowing my luck i'll rip it off.
looks amazin mate, is the kit made from fibreglass?
coz im looking at kits for mine agen, lol, im gettin bored with the appearance now, your kit looks ace though, cant wait for it 2 get fitted mate
wer u gettin it fitted?
Mate Alans going to do it.
I am waiting for a while though as i want the wings that have vents in them and the vented headlight cover so car won be seen for sometime LOL
Bought these today
click And bought this awhile back havnt fitted it yet though
click Going to sort out the suspension as it hasnt been the same since i hit the kirb.
Will be buying these as soon as i have enough
click The month after.
Oh and my wheels are paid for just waiting for them to arrive.
Mate Alans going to do it.
I am waiting for a while though as i want the wings that have vents in them and the vented headlight cover so car won be seen for sometime LOL
Do you mean louvers etc, if so you can buy them in B&Q in a pressed steal and get then welded and smoothed into your wing and will still give a profesional finish, can even have a look around work for them in stainless if your interested in going down this route. Let us know
looking good tony stu shid have finsished with your bonet soon. then you shud get out an get as much practice in as posible b4 the kit goes on. wot you got in mind for paint why not got for a matt black for know as least if the are an knocks its easy to repir an cheap for know so your on the road asap
Mate Alans going to do it.
I am waiting for a while though as i want the wings that have vents in them and the vented headlight cover so car won be seen for sometime LOL
Do you mean louvers etc, if so you can buy them in B&Q in a pressed steal and get then welded and smoothed into your wing and will still give a profesional finish, can even have a look around work for them in stainless if your interested in going down this route. Let us know
Louvers matey yes.
The only problem with getting them put into my wings is they catch the wheel when its turned so the ones i am buying are slightly wider then the standard ones plus there is a good amount of rust on one of the arches cheers anyway.
Shaun going to keep it red and black think ing maybe 2 tone.
I am going to play with the standard bumper for now as the fella who was buying it isnt now.
Do need to get out and pay though its pissing me off it just sitting in the garage doing nothing.
Looking forward to getting the kit on
Should look good pitty my drifting wont match the looks of the car.
Started work on the hub carrier aswell as the rear wheel still dosnt sit right so hoping the new carrier will fix that and give me some proper camber.
lookin very good mate, cant wait to see how it turns out, love the front bumper the most, intercooler looks huge through it
gonna look nice mate,is that back bumper just held up next to the cxar or photochopped on? or is it actually placed on over ur current bumper?
just a wierd pic is all. U dont half work fast dude
gonna look nice mate,is that back bumper just held up next to the cxar or photochopped on? or is it actually placed on over ur current bumper?
just a wierd pic is all. U dont half work fast dude
Its just placed over the old bumper Scoop will be a while before i get the kit put on proper as i want wings/bonnet and a vented light cover then its off the bodyshop for spraying.
I have two tone thing in mind for it.
Just got myself a 2way diff
click Same as this but used.
Its been well looked after oils been changed reg got it at a good price too.
Paying in two payments so will have it the end of march.
The list of things to put on my car get bigger and bigger must pull my finger out and learn how to put some of the stuff i have bought on my car
Thanks to the powell (dw) for this
http://www.driftworks.com/catalog/pr...e=transmissionTHIS COMES AT THE END OF THE MONTH
and leggy (dw) for this
http://www.driftworks.com/catalog/pr...nsion-steering will be on my car soon.
THIS I HAVE ALREADY.
Its comming together slowly if i wasnt getting married it would come together much faster.
This is next
http://www.driftworks.com/catalog/pr...djustable-arms or would it be worth me buying the 4 arm kit???
links dont work for me
Nor me...
The Dots are causing the problems .............
in the links
Try now.
I HAVE JUST HAD THESE DELIVERED
click THIS ARRIVES AT THE END OF THE MONTH 2WAY
CLICK AND WILL BE BUYING THESE SOON OR MAYBE A FULL KIT.
CLICK
Started to strip out the insie of the car today.
Will do the rest asoon as i get time off work as i am working a silly amount of hours to buy stuff for the car.
what was all that hammering and banging for? lol
just keep working...it'll be worth it in the end lol
how come your stripping it mate?
how come your stripping it mate?
Going to try and get into drifting propley and also have you sat in the back of yours yet???
Would wish it on anybody over 4 feet
makein progress mate u putti a cage or anythink in
makein progress mate u putti a cage or anythink in
Will end up with a 6 point cage just waiting to see if the rules for the euro drift are going to change next season as they might be banning dash dogers (like stu macs) so i would need one that went through the dash.
Wheels are ment to arrive 2mora but i'll have to wait and see.
looking good tupac
i went the jao car autions the otherday an all ready have my next drift project lined up . with the next car it will be fully stiped down to the shell all carpets an sound pading all the heater matrix door cars the full works. an then suspention mods b4 the big engine work. so hopfully shud be on the road again soon. an we can get some good prctice in an some events to
Indeed matey.
Tell me what it is then???
I will be taking most of the stuff you have said out of my car apart from the heating (dont like the cold me)
makein progress mate u putti a cage or anythink in
Will end up with a 6 point cage just waiting to see if the rules for the euro drift are going to change next season as they might be banning dash dogers (like stu macs) so i would need one that went through the dash.
Wheels are ment to arrive 2mora but i'll have to wait and see.
would it not b better 2 just get the 1 that goes through the dash?
have ur wheels come yet matey
Wheels arrive today.
Dash dodgers are cheaper and can be modded to go through the dash.
So a Dash Dodger is a roll cage then?
That goes around the dash, so you dont have to cut into it?
Help i'm new to Drifting
So a Dash Dodger is a roll cage then?
That goes around the dash, so you dont have to cut into it?
Help i'm new to Drifting Correct
It wraps around the dash making the car more road use friendly as you can keep the interior in tact.
They are safe, but not as safe as a straight bar that goes through the dash, as as far as competition cars, and safety regs go, you can never be too safe.
The one fitted in my car is a
dash dodger, and Id rather have it than not have it, and its suitable for the type of things I want to do with the car.
As for drifting regs, I think the non dash dodging cages will only be made obligitary for to very top level of the sport (D1) where the cars are purpose built - at club level the cars are generally road cars used for drift, and this may be a regulation that could cripple the low budget drifter or make his car less road use friendly.
Ill have a look at my blue book tonight and see if there are an specific regs...
Thanks Chewy
I'm now up to speed
All true stu.
But to twin (2 cars drifting at once) you need a cage.
Funny Though, your going sideways ?? (Drifting)
Why you need a roll bar in the dash lol..
Safer if you go on your roof if you hit somthing side on there's a good chance you'll roll.
At last i have got my wheels and they look verynice.
Yet more things to put on my car.
Cheers matey like i was told yest by my mate i need to stop buying things and start fitting
I second that, and they look great on Donna's car too
Mark this is twinning.
Listen to them
[youtube]jK-C5WdSv0I[/youtube]
And this is why i need a cage
[youtube]Pw4_0sIew3Q[/youtube]
click Takes abit to start.
Cool i'm watching the video's and typing my message lol
First Video : The Commentary cracked me up lol
Second video : Wicked matey..
I guess with Drifting there is more for mistakes lol...
Do you get extra points for Drifting or something?
How does it work?
Start a New Topic in Chit Chat about Drifting,
as there has to be rules and regulations we don't know about.
Tell me about Twinning ??
Looks like your going to need a supply of bumpers lol
Mark i'll copy and paste the rules up now matey.
Drifting is more than just going sidways.
Do peps think i should get these sprayed white or leave them gold???
Keep gold matey, looks better and more unique
Does not matter what colour you do them Tone, cos by the time you get your car on the road we will all be living on Mars and have our own spaceships!!lol
Seriously tho...white
Does not matter what colour you do them Tone, cos by the time you get your car on the road we will all be living on Mars and have our own spaceships!!lol
Seriously tho...white
Just bought myself some gauges oil temp and pressure so they will be on the car in a year or two
Also been trying to fix my rear carrier but carnt get the drive shaft out and its really pissing me off.
once thats done i'll be able to put the new carrier on and have my rear wheel sitting right.
Then its just fit this little lot.
fmic not on right yet.
fit battery in the boot or buy a small one.
Tein tie rods and ends
front and rear strut braces
steering bush
2way diff once its arrived
and get it painted and the kit on.
All in a days work i think
Right drive shafts sorted so the carrier will be done nextday off which is sat.
I hate not having my car on the road its pissin my off.
Got alittle work done on the car today and i amean a little.
Could i like hell get this nutoff my hub
Its a 27mm nut holding the hub carrier in place ( nut is the top one) and even with the help of beemer joe (cheers matey) it wouldnt budge.
Does anybody out there have a genie and air gun so i can wisk it off please.
I am trying to get the car ready for its mot asn only need to do i couple of jobs one of which is having a bonnet which i still havnt got back from xmas eve.
ive just had an idea mate.
If you can't get hold of an air gun 2moro and you're back down there again, i've got a bit of unistrut which I might be able to drill and somehow fix to it.
That way it'll be easier to hold and have some leverage while you undo it. Don't know if it'll work, but could be worth a try.
Will have to see matey if i could spell proper then all would make sence
Genie is ment to say Generator.
Managed to sort out my quickshift i think.
Will put it on when i get chance to see if it works.
Because i carnt get the bolt off the hub carrier i thought i would take the back bumper off ready for when i put the new one on and guess what I CARNT GET THIS OFF.
Stupid bolts at the back of the bumper or rounded off so its going to be a case of cutting the bumper off RRRRRRRR will nothing go right on this car at the moment.
wots the plan of action then ?
wots the plan of action then ?
I havnt got a clue
calm down matey, i got a bit of spare time this week, so if you want me to come down one day, in the van, with all the right doctors tools, then i ill, but i ain t comin in the dress ! 07840397441
but i ain t comin in the dress ! 07840397441
Dress?!?!?!
Andy you scare me
but if you want to help i'll be trying to work on the car after 2pm on suday.
I am prob going to get white line anti roll bars at the end of april and maybe the kit sprayed then i am going to start thinking about engine mods been talking to jez at horsham developments (vie email) about getting my car to 250bhp and have give him my list of mods so far.
Been told i will need a T28 and his stage 1 chip to get this so maybe i'll have 250 quicker than i thought.
Also thinking about getting a cammed but not sure whats best or how to do this any offers????
Not sure about the best cams matey, TBH I dont think many bother and there aint really that many available due the the limited production run of the CA18 in Japan.
I know a few people have fitted an inlet cam from a Sunny / CA18DE, not too sure of the gains though.
See how ya get on with the turbo first, cams is a N/A mod more than forced induction, turbo and fuel should come first
Fixed the rear hub carrier today at last and the wheel sits right no more pos camber will be staying away from kirbs from now on.
Also fitted my wheels and got my bonnet back.
Just need to sort the front mount and get my new wings and the cars of the bodyshop for a respray.
Think the wheels need doing white though.
Yeah I agree wih the white wheels mate.
Look great in gold on Donnas car, but just doesn't go as well with the red
At least SOME work is getting done
How'd you manage with the hub carrier in the end?
I think they look quality in gold personally, to be honest I see a lot of cars driving round with white wheels and most of them look pretty tacky.
Might look good on the 200, but the gold look sleek as they are anyway, but your decision at the end of the day matey. Glad to see the cars coming along sweetly.
Yeah I agree wih the white wheels mate.
Look great in gold on Donnas car, but just doesn't go as well with the red
At least SOME work is getting done
How'd you manage with the hub carrier in the end?
Had to take the rear disk off and take apart the handbrake cable and shoes then tool the hub to a garage and they took the nut off with a gun.
Now i have the bonnet back i am up for sorting the car out havnt no bonnet i didnt see the point in sortingthe car out lazy really.
Still not sure on the colour though can sombody photo chop the wheels for us and maybe a different colour for the car too as i might like it to go blue or dark purple.
Them gold wheels will go well with blue or dark purple
Next mod is this.
click then its off to the bodyshop for a respray i'll prob stick to the red for now.
I am also thinking of buying new back lights what do you think remeber the bonnet roof and boot will all be in black.
click I go and pick up my 2way diff on thursday once i have this all i need suspension wise its front and rear anti roll bars solid rear subframe bushes and drift works four arm kit which is this
Driftworks adjustable camber control arms with pillowball ends allow you to accurately set your rear camber. A must for any lowered car, as the standard eccentric bolt doesn't allow enough adjustment. Correct alignment is essential when trying to achieve the perfect drift setup
Driftworks adjustable toe control arms, again essential when lowering the car, you often go beyond the range of standard toe adjustment, and cause uneven tyre wear and bad handling characteristics. These arms allow you to align the car back into spec. The use of the spherical bearing helps eliminate unwanted play in suspension components under the heavy loads that drifting applies.
Driftworks traction control arms, replace the standard non adjustable Nissan part. It is the final adjustable arm needed on S13,S14,S15,R32,R33 rear suspension set up. Adjusting this arms length decides how much toe is given to the rear wheel under suspension compression. The arms also eliminate another of the unwanted standard rubber bushes from the rear suspension setup, once again contributing towards that perfect handling car.
Driftworks adjustable tension rods allow you to acurately set the castor angle of the front suspension. By using a high load spherical bearing they eliminate all the play that the huge jelly filled standard bushes cause. This gives you much more predictable and acurate steering, handling and braking as the wheel is going where you tell it to instead of where bumps in the road tell it.
Done the quickshift its now in the car and gives a better gear change.
Also fitted the fmic piping and i am far from happy with the pipe work on the inlet side and think i may have to get custom pip work done to replace it.
Also the car wont start its turning over but wont start up the pumps charging strange as it started up and drove out the garage but needed pushing back in with Donna's 600bhp accent
Also cheers Joe for the help matey.
Also forgot to mention i might be buying the wide arch kit for my car now as i am trying to get the car looking a little different.
If i buy this though the kit wont go on till the end of sept poss Oct
Just waiting to see if he can get the front wings for me.
should look sweet mate, can't wait to see it
As the rear arches are 50mm wider and the fronts 25mm i am going to need spacers and prob bigger wheels so this may take somtime to save up but i'll kill myself trying.
For now though i am going to get the car through its mot as i am off thr ring in sept for my 30th.
I now have all my gauges
oil temp
oil pressure
boost
So all i need i need to do is buy my oil cooler from apex and everYthing can be connected (and prob break)
Ps the kit thats going to be on the car WILL be the only one on the uk LOVE IT.
Picked up my 2way diff today and got some more wheels to kill
Whiteline anti roll-bars oil cooler and poss solid subframe bushes next might even get a mot too.
Looking for cheap 8j fronts and 9j wheels if anybody can find any please
4x114.3 et 35 if pos.
Its coming together slowly (very slowly
) i got a set of extra alloys today too
The fmic is at last where its ment to be (i think)
Sits higher than it used to as before it was far to low.
Needed to remove more bits of the car to get it done right but i think its sorted out now just need to get the right size battery.
Also the kits going on at the end of the month not getting the wide arch kit as its going to cost far to much as i would need wider wheels spacers and the rest of the kit on and a full respray.
The cars been off the road long enough.
Need some help this sunday after 2pm putting my new diff on.
The jobs not hard but the weight of the diff is any helpers??
Would just be a case of helping me lift it into place with the help of a jack.
I'm sure I can lend a hand if noone else offers matey.
Haven't really got much to do to mine without the head
Just a bit of cleaning and tidying things up.
I've got a jack too if you need another one.
I'll probably be round there anyway
The more jacks the better Joe the diff very heavy.
Cheer matey.
Anybody else
???
i may be able 2 help mate, ill try pop down after work at 4
Where's ya garage matey? If am not avin dinner at me mums I will be able to help ye.
Dont post the address on here, send him a pm.
Lol I meant as in area of the Wirral Pomp matey. I don't think Tupac would be silly enough to post the address on a public forum lol!
i would but i hardly ever get the weekend off
Looks like things have gone tits up with the kit so i think i'll chuck the car through its mot and bring it out to play.
Will be buying new wings instead i think.
why whats gone wrong with the kit?
Why, what happened to it matey??
Nothings up with the kit just heard somthing about the place where i was taking the car to get sprayed is havnt things sorted out.
Carnt say to much as i am not ment to know.
ah okies on a need to know basis type thingy lol.
Just ordered this little lot.
I'll copy and paste what is is so i dont get it wrong
Traction Rod Set
Tension Rod Set
S13 - Rear Camber Arm SET
Rear Control Rod ( a.k.a Toe Rod SET)
SOLID STEEL CONSTRUCTION
POLISHED HIGH GLOSS
SPHERICAL PILLOW BALL JOINT DESIGN BUMPER STEER DESIGN ALLOWS EASY ADJUSTMENT
OF SUSPENSION TOE SETTING CORRECTION
THESE ARE APPROVED BY OVERSEAS AND SO CAL DRIFTER, EXCELLENT FOR COMPETITION!
Also i have sorted somthing out for the kit so the front bumper might just be on later not sprayed yet but at least its a start.
I thought you had taken up Dentistry lol
Nice, apart from them being shiny what the advantage
of having those ones Tupac?
As oppose to to standard ones?
Fully adjustable means i can get toe in tow out.
Adjust poss camber neg camber
And there stronger than the standard ones so when i am sidways and hit a bump/kirb they wont bend as easy.
Kits not going on now till i get the wide archs for it might aswell go the hole hog.
50mm rear and 25mm fronts
So with this in mind and the fact i am fed up not being able to go out and play in it i have put the old bumper back on.
Get the f***in kit on it!!! lol. Wheather you can get it sprayed asap or not, just get it all fixed on.
Whats happened about the rear bumper? Managed to take it off?
You get your diff sorted yet mate?
and the final question...
has it started up yet?
finally got ya bonnet back matey, lol, been a while
Get the f***in kit on it!!! lol. Wheather you can get it sprayed asap or not, just get it all fixed on.
Whats happened about the rear bumper? Managed to take it off?
You get your diff sorted yet mate?
and the final question...
has it started up yet?
Going to need the wings as the front bumpers too wide plus it will look better.
Rear bumpers staying on as i'll prob try n rip it off drifting
The diff will prob be sorted thursday
And the final answer no it hasnt started yet but i know the problem and will sort that out once u get the small battery.
Almost time to get it back out to play
Did alittle work on the car once i finished work today.
Stripped alittle more of the inside out and sorted the front bumper so it sits right.
The cars going to look alittle tatty for a while why i learn to drift better but i dont mind as atleast i wont be wrecking the kit one its on (which will be nextyear)
Also need spacers for the wheel as they rub the coilovers but unsure what size to go for.
Also going to need somewhere with a ramp to do the 2way anybody out there who could help.
For now that and the bodkit are sitting in my front room much to Donna's delight
Car looks really good, wish mine sat that low
im off(well suspended from work) so if u need a hand with anythin let me no.
It makes me think of that Tune ?
There once was an ugly duckling..
Meaning your going to strip and knock the shit out of it
and then it will become a well worth the wait kinda of a motor.
So why yu waiting until next year to put the kit on ?
(Funds)
It makes me think of that Tune ?
There once was an ugly duckling..
Meaning your going to strip and knock the shit out of it
and then it will become a well worth the wait kinda of a motor.
So why yu waiting until next year to put the kit on ?
(Funds)
Only cos its going to cost so much matey.
Wheels £1000 as i need 9j wheels plus i only want gtr rota's
Wider fenders front and rear are £450
Spacers to fill the arches about £200 for 4
and then its the respray which will be around £1200 if i am lucky.
Here are the fenders i will be getting.
20mm wider at the front and 50mm wider at the rear.
£2850...so should be on the road for mid 2011? lol
wide fenders! you sound like an american! i might be able to help you with a ramp, either a two or four post one? pm if your interested.
£2850...so should be on the road for mid 2011? lol
Battery and the cars running
Then its just a mot Jones.
Anyways rich boy lend us the cash and it will be on the road sooner.
C u in work 2mora matey bring your nail and i'll get some pics of your new rims on it.
wide fenders! you sound like an american! i might be able to help you with a ramp, either a two or four post one? pm if your interested.
Will do matey cheers.
hurry up and unleash the beast! mean while look at these lol
hehe was best i could do as i cant find you videos
I'll go with the top one how do i do it (load it up) as a have things on driftworks and sxoc
Cheers matey will go try it now.
Been a doing alittle today.
Fixed the front lights so they now go up and down thankgod.
Stripped out the carpet and other little bits need some bucket seats in there now.
Fitted the front strutbrace.
And got the car running not great need to sort it out propley the idle isnt right.
av got some buckets an harnests if you want them matey
It lives and here is my proof.
Doesnt sound well though.
vroom vroom. but its still not on the road !! mines gonna be dead b4 your is ready.
Just noticed in the pics
my fmic isnt straight RRRRRRRRR
Whelan it wont be long matey.
I am thinking of getting rid of the rear spolier and getting this instead.
And also a uper spoiler too i'll get the pics of that up soon.
click and the rear spoiler
click
looks gd mate, cant wait til its back up an running
i reckon you go for a more subtle spoiler.
Also looking at some more wheels LOL
Lol what are the ones your looking at now like??
gtr wheels but need the wife to say YES
Go any pics of em to post?
Little update.
Got the old diff out today and will be chucking the 2way on the car on weds.
Also just bought this.
And will soon be replacing the spoiler with this type.
Cheers for the help today shaun.
Looks sweet that spoiler mate, a lot more streamline then your current one.
finally got round to fitting it lol
Hope it passes it MOT on wednesday matey
finally got round to fitting it lol
Hope it passes it MOT on wednesday matey
It wont matey.
Anti roll link bars are missing and prob some other bits.
Just chucking it in so i know what needs fixing on it.
Looking good matey, PM sent about some Anti Roll bars
Good idea matey, hope there aint too much that needs doin
2ways on at last took me long enough to get round to fitting it.
Need some oil for it though as the diff oil lights come on.
Also fitted the battery and got the car running but its running badly i have a massive boost leak somewere will have a look at this on weds.
Also fitted the spacers so there is no more wheel scrubbing.
get some braided hoses on the breaks
Finally! The diff is on lol
What you do about the broken pipe on it?
whats next on the list?
Made a new one so thats all working fine now matey
cant wait to see this on the road matey, instead of the hyundai !!
cant wait to see this on the road matey, instead of the hyundai !!
me too matey i'll even take you out on a quick dori if you want.
Does anybody fancies giving me a hand on weds to find out were my boost leak is comming from i wouldnt say no.
Still waiting on other bits which i think will come 2mora aswell so should start fitting them too.
Just bought this carbon gauge holder its goes were the vents are in the centre of my dash (gauges in the pic are not mine) it will be holding my boost/oil temp/oil press gauges.
Well big thanks to Chris the car now runs.
It does have a slight boost leak but the plugs were not in the best condition to say the least and here was me thinking of buying new hard pipe LOL.
Small video only as proof the thing works LOL even though its on gravel the diffs tight as you like.
At last i have driven the car.
Its been in bits since 24th of december 2006.
i will have to change the way i drive on the road with the 2way on as its alittle different to what i am used to.
Also need to find the dame locking nut key as i carnt take the other wheels off the car yet.
Jobs still to do.
fix front bumper passenger sides not right as you can see in the pics.
Fit the tein tie rods and ends.
fit the adjustable suspension arms.
fit my gauges boost/oil pressure/oil temp.
Oh and get some dori time in.
love the multi wheel thang you got goin on there
lol glad its back matey!
passed its MOT then?
Whats the diff like to drive with?
Sorry to say but....intercooler is
still wonkey
lol
love the multi wheel thang you got goin on there
lol glad its back matey!
passed its MOT then?
Whats the diff like to drive with?
Sorry to say but....intercooler is
still wonkey
lol
Mutie wheel thing will be gone once i get the dame locking nuts off the car carnt find the dame things
Needed fuel so went the petrol station so i could take it COUGH
The diffs MAD went onto the dale indu estate and gave the car a boot took my foot off and well lets say sidways is alot easier to get even in a straight line.
And its the bumper that makes the intercooler look wonkey its inline with the bottom rail of the cr but the bumper has slipped down on the left hand side of the car.
Will fix it once i get the car to my house so i can use the drill and make a bracket up plus once i got back the garage i noticed that the bottom hose hadnt stayed on thats why i was getting a boost leak on the way back.
Its getting there though.
woohoo its on the road! but just like i said mines now dead and im on a pedal bike
The roles have reversed LOL
As i was on my push iron not so long ago
Yours will have alot more power than mine though matey when its back.
Made up for yu tupac, your getting there, and I'm sure there will be lots of silly video's too.
We done there matey.
Sound like fun is just around the corner.
Made up for yu tupac, your getting there, and I'm sure there will be lots of silly video's too.
We done there matey.
Sound like fun is just around the corner.
Me silly video's NEVER lol.
Fun is to be had going round corners matey.
Just found out BOTH my adjust arms and vented light covers are only just getting sent out not very happy as i bought these on the 30th of April.
thats pants
i bought a center vent gauge holder (like your carbon one) over a week ago and still aint got it.
thats pants
i bought a center vent gauge holder (like your carbon one) over a week ago and still aint got it.
Still havent got the
Just found a new problem with the car brought it to my house as i need power to do alittle bit of work on it and found i carnt get over the 2nd speed bump in my road LOL.
Think i'll chuck the old suspension on for now.
Isnt that always the way.
YOU CLEAN THE CAR THEN IT RAINS FOR TO MINUTES AN THEN THE SUN COMES BACK OUT RRRR
At least the cars running.
I am after for this car.
Bucket seats must be fia aproved and indate would rather they be on s13 runners
Harness's
and a cage
If anybody knows of any being sold can they send me a pm please.
vented light covers fitted slighty different shade of red but the cars getting sprayed once the kits on.
Cheers matey
as i am keeping this front bumper on i might buy some clear fronts or should i smoke them????
hey i was looking at some of these on ebay today. they are going for £180 tho.
Thats what i got mine from matey.
They are from xspower.
like the vented light cover matey.
Them arms are sweet. I'd be gutted that they'd be going underneath the car than on show.
As for the front bumper lights, depends on the colour your getting the bumper sprayed, but i'd say smoked.
like the vented light cover matey.
Them arms are sweet. I'd be gutted that they'd be going underneath the car than on show.
As for the front bumper lights, depends on the colour your getting the bumper sprayed, but i'd say smoked.
Cheers Joe
I'll keep em greased up anyways as i want thm to work well and i have been told adjustable arms are a pain if you dont keep them right.
I was thinking smoked but not sure who can photo chop on here now???
I could matey, give me an hour or two, and I'll give it a go unless someone else has a go?
what colour you getting the car sprayed now anyway?
same colour it is now matey.
if you can take some of the side view of the car and graphic it up as it will hide the bad bodywork lol
there ya go...
tried a bit to match the colour of your vented headlight too.
MMM thinking maybe clear then.
Sort your intercooler out mate...it looks like stevie wonder fitted it lol
Cars comming to mine today Chris taking the towing eye off with my grinder.
Went about trying to fix the state of the fmic today and removed the front towing eye and managed to get the front mount to sit right now.
Also as my exhaust fell off the other day because i hadnt dont the clamp tight enough and it fell off cleaned t upand its in better condition than i thought.
took the front bumper and wings off as putting the bumper on while the wings on is a pain in the arse.
bloody ell mate how many times has your car been took apart! lol
when you putting her back together or is it done since the pics.
Will be back together this weekend poss matey.
Just need to sort a clamp out and FIX THE BLOODY QUICKSHIFT again and its do for now
Bought my whiteline anti roll bars front anr rear just need to fit them along with everything else LOL.
Just want driftworks front and rear lower arms then i am happy with the suspension setup of the car.
http://www.driftworks.com/catalog/pr...2-r33-r34.htmlCame veryclose to selling the car though glad i never now.
AT LAST THE LOCKING NUTS OFF ONLY TOOK 2 HOURS LOL
so now i can fit most of the suspension parts.
Started with the white line anti roll bars and guess what 2 nuts have rounded off rrrr got fedup working in the heat and went to watch the rest of the gp will go back to it thursday and get as nuch done as poss.
lol you lazy git lol.
What is it with you and trying to get nuts off? you never have any luck!
Good to hear you've made a start on your suspension though
Indeed Joe most of the things i have tried to take off on this car dont want to come off easy they tend to snap or just be a pain in the arse.
Looks like i have myself a T28 turbo now so this will be on asoon as i get some help as i dont know what or how to put it on my car.
Started fitting the suspension bits today.
Two of the nuts that where holding the anti roll bars had rounded off and it was murder tring to sort that out took up most of the day as i had to go round looking for a bolt splitter to get them off.
Sorted now.
Will be doing the rest later on nextweek when i get a day off.
Once on i'll take the car and get it all set up right.
On the look out for a t28 turbo aswell.
Thought you had a T28 already matey??
No matey car came with the standard t25 ment to be buying shauns but havnt heard anything and my cars sitting in the garage without a turbo.
Ah okay matey, just noticed it in ya previous but one post lol. Wondered what happened.
Ye checked on fleabay?
Fitted the front bumper today and i dont know if i like it.
Dont like the big gap between the bumper and bonnet.
Its only on to see how much works needed so all the panel gaps will get sorted in the bodyshop.
Dont know what to do though should i wait 12 months and just drive round with the standard looking car while i save some more and get the wide arches???
I like it
Keep it standard till you get your wide arches, as it will only get damaged
like it mate but as joe said drive standard incase it gets wrecked
Will prob put the old bumper back on for now and put the kit away again untill i am 100% sure what i want.
Still need a t28 though as the cars sitting without a turbo.
looking good mate, really want 2 see it done now, its a tease putting the bumper on, lol
looking good mate, really want 2 see it done now, its a tease putting the bumper on, lol
I know matey will be trying the rear one on soon to see how it sits.
Yeh go standard for now Tupac,
if it doesnt work out you can always sell the kit you have as new.
By not working out i mean one drift too far
Fingers crossed that wont happen.
Save up and have your dream
Little update.
Managed to get one of the rear arms on the car tonight but couldnt get any of the other nuts off so looks like i'll be grinding the buggers off.
Also stuwells took the aircon off for me didnt know there was so much of it little less weight in the car now.
Been told this free's up some bhp not to sure how true that is or how much.
Also looks like i have go myself a T28 so that will be on with the screemer pipe i am picking up soon just need the car chipped and i'll be happy again dont know what power the car will be running once all this is done.
Yeah the aircon will free up some break matey, but only if ye used it when it was in (i think anyway, someone correct me if am wrong hehe). Also, if ye did use, it will mean ya use less petrol.
Lookin at it though, the weight saving will give you a bit more go as well lol.
What power are ye lookin at when all is done and ready to go with the T28 on? Any idea's yet, or just gonna RR it and find out that way lol.
Fookin ell..you and your nuts mate!
you want to get some new ones (stainless if poss) to replace them rusty ones
Aircon only uses engine power when turned on.
Its on a clutch mech, and spins freely when not in use
Fookin ell..you and your nuts mate!
you want to get some new ones (stainless if poss) to replace them rusty ones
My nuts are rusty cos there well used if you know what i mean
You missed the leeking diff in the background though joe LOL.
Picking some up 2mora joe.
Matty not sure on the power but with advice of a fella called jez all i need is one of his chips (stage 2 i think) i could well be looking at about 250ish.
hasnt your diff been pissing oil since you fitted it?
whats causing that?
Gasket or maybe the hose which is just out of shot in the pic.
Will be taking it off again soon and having a proper look.
that nut in the first pic doesnt seem to be on a the bolt a complete nut (bit dangerous lol). If your changing the bolts make sure your using high tensile as normal wont be suitable for them kind of loads. Agree with stuy only when aircon is running, I know this as when driving about 70 on the motorway and switch it on a feel a slight surge.
Guess you mean on the camber arm if so havnt put that bolt on yet and the other ones not tightened up yet.
Need to find somwere to get the high tensile bolts from anybody know were i could find them???
Lloyd and Jones - On new chester road (A41).
If you're coming from Bromborough heading to the rock., tis on your left
ask for the 12.7's tho as the 8.8's stretch. don't worry he won't look at you funny.
just past the carphone warehouse.
ask for the 12.7's tho as the 8.8's stretch.
Didn't know that. We just get the 8.8's for work
could be 12.8's i forget now.
8.8's are strong but for the extra 10p i think per bolt it may be worth it.
12.9 i think is the highest you can get bolts?
must be that then, last time i had to use em was 2003.
Guess you mean on the camber arm if so havnt put that bolt on yet and the other ones not tightened up yet.
Need to find somwere to get the high tensile bolts from anybody know were i could find them???
If you give me the old ones I will match them up with some high tensile ones but they will be cap heads so will need an allen key to hold the bolt when tightning up.
Got a T28 cheers Oscar.
Will be fitted this thursday (cheers stu-wells)
Then its off for the mot and if all goes well the car will be out and about the end of July.
Just ordered an new quickshift too and should have a avcr around the middle of July to go with my stage 2 chip.
Wouldnt be a problem matey when do you want em.
Also need the front arms (forot AGAIN what they are called) as the nut n bolts i have in them arnt good enough.
[quote=tupac]
"Then its off for the mot and if all goes well the car will be out and about the end of July."
Didnt you say that in January lol
And feb and march might have even said may
Too much typing, not enough mechanic'ing
Fingers crossed the car will run today.
Just on my way the garage now if anybody is bored and fancys helping feel free to come down.
You will Not learn anything by letting other people do the work for you mate! You need to start having a go at stuff yourself...its the best way to learn matey
Also you will get back on the road quicker as you are not waitin round for other people to turn up
I learnt to duck when a spanner comes flying over.
When ever your frustrated --- >>> You're actually learning
Well i learnt nothing to day and i am frustrated as HELL.
Fooken hate this car at the moment everything i try to do just dosnt work.
No turbo/rounded off nuts HATE IT NEEDS BINNING.
Chin up fella
Think of the days on the track
Right alittle more relaxed now.
Will go back down the garage once i get Donna's car back from the dealers.
Phoned a garage to get a price on having the arms fitted £40 a hour plus VAT.
Think i'll do it myself i only have the rears to do as the front ones are on.
Little update.
Tried to fit the rear arms on the car today and every nut i came to rounded off.
So took out the good old grinder and tried that and guess what that didnt work now i am in a mess.
Managed to drind a nice hole in the rear subframe so i think i'll take the subframe off have it blasted and put all the arms and chuck some solid bushes in it while i am there.
Also took the big gay wing off as i am bored of it £60 if anybody wants it.
Also going to have to sort out the ride hight once the kits on as it far to low looks great but the bumper would be off as soon as i hit a stone.
You will get there Tupac you will
Yeh it looks a little low.
I doubt you could get down your street with those
speed bumps, as it is you need oxygen to get over them.
T28 is all bolted up ready to go on if it ever stops raining.
Need the bit that goes to the hard pipe off the intercooler though if anybody has one give me a shout please.
Liking the look of my car alot now though just needs to run.
fook me thats low.... lookin good tho fella
Had enough cars going on ebay.
I know i do love this car but i have had enough.
LINKY TO THE BEASTIE
Awww man I hope its something youve thought about matey n it aint summit ye regret tomorrow, sorry to see it go if ye get rid
Just fedup matey havnt been drifting in nearly 8 months and i just dont know what i am doing on the car.
shame to see it go. whats next on the car front?
Am sorry to hear it fella, its a great car, pity its taken a lot longer then expected to get back on the road.
Understand how ya feel though fella. As Stu said, ye got any idea's on what ya might be lookin at next??
gutted you getting rid mate hope all goes well with what ever you get next
don't do it matey
you've spent so long on this. don't give up now.
it'll be worth it in the end
Shocked
Its up to you Tupac, I know you will decide what is right.
I would like to see it with you in it drifting.
But time against you i can understand.
They may buy your car but they cant take your good looks
If you decide to "save" for the type of drift car you are after it will probably take you about 2 years ish!(24 months at £125 a month)and thats only for a £3k car...
As an alternative I will do all the bits you want doin to it for a fixed price or by the hour...up to you,but you have got most of the bits you would want from another car already on yours! Shame to get rid to buy essentially the same car again??
True Chris whats the price though pm me matey.
If the car dosnt sell then its a sign ( or its a shed)
Like i said i love the car but i am in over my head and dont know what i am doing.
Everytime i try i break somthing else.
Might be keeping it but cars like this keep changing my mind
This is a sileighty
Yeh Good advice there,
and stop being so hard on yourself Tupac.
Your the only one honnest enough to tell everyone
about your mistakes.
Jesus i have a few that would make you laugh.
Tupac your human, were designed to make mistakes,
but dont let on to the missus we have to keep that
"I'm perfect image alive"
if you don't sell i don't mind helping out. when cars reach a certian age everything brakes, nuts sheer, hell half of the stuff i took off mine was rusty, had a few snapped bolts, and alot of ballaching bits to put on! it does and probabily will cost more money to put things right, but after you've spent so long on it theres no point quiting now.
if all else fails, pull out the haynes manual.
its alot of car mate. your doing the right thing, if you have admitted to your self that its too much then it must go.get your self some thing easyier to work on. look at chewy, he s got all the time and money in the world and know how, and his 180 dont even leave the drive way its that bollocks.
its alot of car mate. your doing the right thing, if you have admitted to your self that its too much then it must go.get your self some thing easyier to work on. look at chewy, he s got all the time and money in the world and know how, and his 180 dont even leave the drive way its that bollocks.
The only problem with me selling the s13 is i want a ps13 which i will prob end up buying bits for BUT i have learnt a lesson here buy bits and pay to have them fitted
I am having 2nd thoughts though even though i have been offered the res on my car and also offered a standard s13 and £600 for my car.
What to do oh what to do
If you have sex tonight that means keep the old one
looks like i am buying another car then
Worked on the car today and managed to fix bits without breaking anything OH the shock.
Got the old arm of by grinding through the arm and nut n bolt holding it on as the nut rounded off its the same on the other side.
Whiteline anti roll-bar went on without a problem
If the car dosnt sell i'll sort the camber arm out nextweek.
WTF Get it sorted and stop being a quitter!!
WTF Get it sorted and stop being a quitter!!
Want to be a drifter but carnt while the cars in a million bits
You'll only do the same to the next one
You'll only do the same to the next one
If mine sells i am going to cheat and but one ready made.
If you decide to "save" for the type of drift car you are after it will probably take you about 2 years ish!(24 months at £125 a month)and thats only for a £3k car...
As an alternative I will do all the bits you want doin to it for a fixed price or by the hour...up to you,but you have got most of the bits you would want from another car already on yours! Shame to get rid to buy essentially the same car again??
Either way, its boys and toys - we just cant help but tinker...
Managed to do the arms on the otherside today.
Took a fair bit to get the old ones off as the nuts had rounded off on this side aswell.
Next i will try and sort the camber arms out and the tein rods and ends.
Has anybody got a turbo flange for a t28 (the bit with the 2 bolts) think its called the turbo flange.
11mins left on you ebay mate
DIDNT SELL
Glad really as i was in a mood when i put it up.
Will get my head down and work on it now.
Had a good day today feel like i am getting somwere now.
After taking the car out of the garage (pushing as its turbo less) managed to get the help of my mate chris and the trusty hyundai accent managed to turn the car round using the hyundia to push mine with a tyre between the to :thumbs:
Put the tien rod and rod ends on.
There is a big difference between the standard and teins.
Seem to have a lot more lock friend of mine said they dont give you more i thought they did or have i dont somthing wrong???
Dont know if you can tell in this pick.
Also put the bonnet wings and bumper back on and made a water bottle for the washer jets just needs putting on.
Sorted the fmic so for now it sits straight dont know how long that will last though.
Just waiting on acouple of parts for the T28 then i'll book it in for its mot.
Fingers crossed the car will be ready to drift at Barkston Heath on the 22nd of sept.
nice to see some progress, because you have installed some new track rods/ends, i'd advise getting the tracking sorted out at the mot time aswell if you can.
i did mine by eye and it was a good 15+ dergres out!
Mate of mine ha tracking/camber gauges so will be using his stuff.
Chris m3 evo has the stuff if anybody needs anything like that done on the cheap.
nice one mate glad you starting to get some were with it
sounds like you're gettin somewhere matey, but I cant see the pics as photobucket is blocked on these computers, so until I get home, or you use the uploader...I cant see how good it looks
Another good day SHOCKER.
Managed to get one of the adjust camber arms on took 2hours though as the old one was a pain in the arse.
Nuts rounded off so tried to grind a bit of so i could get a socket on no luck so tried to hammer a smaller socket on again rounded off more rrrrrrrrr
So took to the rear arm with a grinder went through 3 cutting disks as they just kept breaking.
Worth it in the end
This was the worst side of the two i'll tackle the otherside later on this week.
Shame they have to get difty really as there nice looking but tha cars no show car.
Its looking good for barkston heath drift day on the 22nd of spet now.
Just the T28 to go on then mot time.
sounds likes it coming along very well mate. Noticed you're puttin a lot more effort in and gettin the results since it didnt sell
sounds likes it coming along very well mate. Noticed you're puttin a lot more effort in and gettin the results since it didnt sell
Indeed matey putting it up forsale made me realise howmuch i like my car plus i also have a driftday on the 22nd of spet to aim for.
Might of got the T28 bits i need aswell so that should be on soon.
Got alittle bit more done today.
Tidy up around the car stripped inside alittle more and managed to grind off the other camber arm took alittle less time than the otherside.
Shame the coilovers so bloody dirty.
Just need the car running so i can go and get everything lined up right.
Will be investing in a set of driftworks bottom arms later on this year which should finish off the suspension setup nicely.
nice one mate looks like you been bloody busy yet again
Indeed matey.
Sold the spoiler and front bumper ( white one) so i have freed up some cash for the car.
On the look out for the bits i need for the sileighty conversion.
cool mate every penny counts lol what you got in mind next
why you sell the front bumper mate? what u fitin instead?
u still fittin the rest of the kit?
To free up some money so i can sort acouple of little bits out.
Still fitting the rest of the kit matey.
And nextyear once i have collected all the bits i am doing this front end swap.
Its called a sileighty.
That will be well sweet matey!
That will be well sweet matey!
Cheers matey getting there.
I have now got the cash from the sale of my bumper so will be putting this towards the car getting mot'd.
Just carnt find a banjo bolt for the tubby anybody know were i might get one from local????
Also fingers crossed should have my bucket seats soon.
love that front end mate looks well sweet
Its a toss up between these seats
Will be in blue.
The top ones the more expensive seat.
like the bottom ones mate
i like the top ones dude, u not thought about recliners like cobra daytona's or the like with 4 point harness ?
No point in my having recliners as i have no back seats and if i want to start drifting proper the edc (euro drift) regs dont let you use them.
Will be getting harness's when i get the seats.
oh right dude... have u seen that blue import silvia goin round, looks like the black one in the pic u put up... its sweeeeeeet
You fool!! -the banjo bolts you mention are just down the road from you at NISSAN
the forza's (bottom picture) are the seat i have. they are very comfy, well for sitting in them stationary for an hour or so, and very supportive. but they are a tad on the heavy side.
i like the silvia's quite abit and the front end conversions looks sweet! how much is it?
Little update.
NOTHING HAPPENED AS EVERYTHING I HAVE BOUGHT OF LATE DOSNT FIT.
Nissan gave me the wrong size banjo bolt a friend made me one and that was to big rrrrrrrrr.
Going to buy a it from Apex as they come on the hose's.
1 bolt is stopping my car going for a mot.
oh eh ! gutted mate, hope u get it all sorted soon
bloody hell mate that always the way
Right at long last i have the right parts ordered and on there way THIS car will be running by the end of the month (aslong as i know what i am doing
)
Which means it wont
but your willing to learn
so one month and one day your allowed lol
Need it sooner than that as i need to set all the suspension right and give it a thrashing to make sure everythings working ok.
Carnt wait for the drift day really am looking forward to it.
I had no idea you were going to do a sileighty conversion! get in touch with JDM S13, name is Owen, on JNW he's done the front end swap and may be able to give you some pointers
No problem,
some pics of it for ya
ice, thats well sweet, looks grrrrrrrrrrrrrreat. !
Verynice indeed matey.
Will pm him
At last i have a banjo bolt
Just had to make sure it fitted.
With the help of shaun the car will be running by sunday at the latest as thats my nextday off.
Fingers crossed anyways.
Turbo is now on YESSSSS.
BIG thanks to shaun.
Just have to sort acouple of little bits now.
oil return pipe needs modding.
water pipes need blocking off
Need to get the turbo flang so i can connect the airflow meter up.
good owrk mate can not be long now till you get it running
Once the flange off the turbo arrives it will/should start up.
Might have a slight problem with the hardpipe off the intercooler as its made for a T25 and i now have a T28 so might need to do alittle cutting to make it fit not sure yet but at least its getting there.
Only been off the road since dec 24th
lol not been off the road that long then
glad you getting some were now mate
well done mate.
you stay much longer after I left?
where you getting the flange from?
Hope it runs spot on first time
About 2hours Joe did little bits here and there.
Got the flange ordered from Apex should be here monday.
Fingers crossed it runs ok will be down there today after footy about 2ish.
If anybody wants to help come down as i need all the help i can get
Yet again this cars pissing me off.
Only good thing from today was i Bought the stuff to put the battery in the boot or behind my seat not sure yet.
Also started chucking the T28 together and nothing seems to fit right.
Paid £37 for a turbo flange( well ripped off) that fits ok but carnt get the dame pipe from there to the airflow unit.
Also the hard piping wont line up to the turbo elbow looks like i need to get a bit of piping made up but i have ran out of cash and this meaning i carnt do my drift day.
The car will not run now till after christmas which is CRAP dosnt help the fact i really dont know what i am doing.
So yet again i hate the car.
gutted
you were lookin forward to that drift day aswell.
I keep running out of money for mine too, right pain in the arse isnt it
is that all you need for it now to get it running - the bit of pipe to get it line up?
Think so matey really i need sombody who knows what they are doing to have a look at what i need to do or give me a couple of pointers.
Just pissing me off i want it running.
I had the chance of buying a modded 200 to the spec i am trying to get this to but its like cheating to me.
I TELL YOU ITS THE CURSE OF CAR OF THE YEAR.
Got myself a bit o cash for my birthday which i have already started spending on the car.
Bought a sparco buket seat and a momo snap-off boss so i can take the steering wheel off the car and bring it a little closer to me when its on.
Also going to get the other little bits i need to have the car running but as i am not going drifting nextweekend i am in no big hurry.
Bought a sparco bucket seat and snap off boss.
Just need to get the seat fitted.
And the boss is on brings the wheel nice and close now.
Having trouble lining the turbo elbow up to the hard pipe from the fmic anybody have any idea's do i need to cut the pipe or do i need to get one made up.
good work mate not long now
good work mate not long now
Prob not going to get it on the road till after xmas now matey there isnt any rush to be honest means i'll be able to do some of the other bits i want so it will run right and not be a rushed job when its on the road.
Things i hope to have done in the next 12 months are.
Cage (6 point)
pair of bucket seats
sileight front end conversion
with carbon bonnet
kit on and car sprayed
avcr
different exhaust
spacers
new spoiler
new coilovers
driftworks bottom arms
hydraulic handbrake unit
solid subframe bushes
Hense why i have started working for a agency aswell as my normal job.
I have only had the car since june 2006 and have done far more than i 1st planned so why stop now.
Prob not going to get it on the road till after xmas now matey there isnt any rush to be honest means i'll be able to do some of the other bits i want so it will run right and not be a rushed job when its on the road.
Things i hope to have done in the next 12 months are.
Cage (6 point)
pair of bucket seats
sileight front end conversion
with carbon bonnet
kit on and car sprayed
avcr
different exhaust
spacers
new spoiler
new coilovers
driftworks bottom arms
hydraulic handbrake unit
solid subframe bushes
Hense why i have started working for a agency aswell as my normal job.
I have only had the car since june 2006 and have done far more than i 1st planned so why stop now.
Thats great that fella, some good plans and even better to see you are happy to put the effort in again, I know it was starting to get on your nerves recently and putting you off even being arsed with it at times, but keep up the hard work fella, it will be worth it in the end!!
It will matey.
I have learnt now that when i get pissed off with things going wrong i just leave it for a while.
I am getting neil at park garage (fella who is doing stu's car)
to sort the tubby and fmic out proply for me as it needs bits that i carnt do or make once this is done its just about getting bit n bobs.
The cage might be here quicker than i thought though not saying i have it but looks promising.
Good to see your positive again Tupac
Where you got the bucket seat hidden lol... (From Donna)
Small steps, i agree with your thinking
just walk away when it goes wrong, easier to say than do. !
Now she knows i have bought this.
Dosnt know about the cage though
ah i hate seeing this thread!
every time i do i keep going back to sxoc's for sale threads.
ah i hate seeing this thread!
every time i do i keep going back to sxoc's for sale threads.
Sorry mate once its done i'll let you have a go (i am sure this will put you off buying one
)
Little update.
Neil from park garage is comming to look at the car 2mora and will be taking it away soon to sort the fmic and t28 for me.
I have also ordered some newlights and gtr grille from Japan for the bargain price of £120 for the lot.
these are the lights
Going for the Sil80 look
You do know that to fit the lights and grille, you also need a matching front bumper, wings, bonnet, and maybe slam pannel...?
Indeed matey been intouch with ep racing and getting the rest from them.
Should be ok with the slam panel as the rest is just a straight forward swap.
Oh and brackets for the lights.
New bits for the car
wings and bumper
What the wings are like on the car incase your woundering why i am getting different wings and bumper.
http://i67.photobucket.com/albums/h287/donnatony/CIMG0581.jpg[/IMG]
Indeed matey cant wait.
Neil from park garage is comming to take a look at the car today at 1pm so should have a idea when it will be running.
Also going to start work on the front end.
Taking the lights motors and other bits off ready.
Things will be easier once the cars running as i can move the thing then.
Going to take a roiad trip to Newcastle to pick my bits up later on this month.
Grille lights wont be with me till just after xmas but i dont mind waiting just need to save for my carbon bonnet then.
Been playing with the car today.
Managed to sort the fmic piping out by cutting alittle bit more out from the battery tray.
Its not neat but it does the job as the cars never going to be a shop car.
Took the old lights off the front ready for the sileight lights to go on.
Started to sort the wireing out for the battery to go in the boot not running it under the car running it through it instead.
Well as some of you know i have had no interent as virgin were trying to con me out og almost £300.
While i have been off the net i have been bizzy with the car
This is the look i am going for sombody of driftworks did this for me.
Cheers just need to get myself up to Newcastle to pick my bits up.
sweet that mate, just a shame after all the hard work and money you've already put into it. so when u plannin on gettin the new machine ?
thats fookin sweet
it is a shame after u put a lot of hard work into it
Once i have the cash i am looking at about 4k for that type of car the one in the pics running 300bhp.
As we speak i have 9 people interested in everypart i have put up for sale which comes to £1750 before postage.
But i also have sombody interested in the whole car and they are local so maybe i would see it finished.
I will be very upset to see it go BUT i just havnt the time of cash to finish it PLUS i hate driving Donnas front wheel drive 206 i belong in a rearwheel drive car
OOOOOOH going to look at a 180sx 2mora no tax or test but cheap sa chips and i already have everything i ned apart from the bonnet for the frontend conversion
and the way my tuff is selling on sxoc and driftworks i can get the carbon bonnet and mot done in no time.
FINGERS CROSSED
if not its a welded diffed seirra for the win
CHEAP AND FUN
its a sad day.
Tis ok as when i do get a car you will see me in it all the new peps havnt even seen this car.
ALL MY FAULT THOUGH TRIED TO DO TO MUCH AT ONCE I HAVE LEARNT A LESSON FROM THIS
well thats the best way in a lot of respects, to live and learn.
Just a shame it turned out a bummer, but all credit to ye for the amount of time and effort ye spent on the 200, tried ya best cant try any harder.
Also cant forget this baby won 2006 Car Of The Year!!
Cant wait to see what ye get next fella!
It a real shame, dont think you should get a car without an mot cause I know it will never get one lol. You will do the same thing again and rip it to bits. Get one with an mot and use it as your doing it and try to avoid having it of the road to long cause you will get disheartened. Hope you get all your money back you put into it, I know it isnt likely that you will (lesson I have learnt). Hope you get what you want bud
Its a sad day as this cars going the big scrapyard in the sky today
I have everything i need from it and what i didnt want i have sold
At least the car left me a parting gift IT RIPPED THE GARAGE DOOR OFF AS I TOWED IT OUT.
Mates just fixed it oh and i also locked myself out the house.
Gutted to see it go matey, but onto pastures new and it was an experience im sure ye will deffo learn from.
Lmao about the garage door, gutted for getting locked out though haha!
sorry to see it go bud, hey could that be little andy in the back ground there
Yer mate looks like your taking a dumb
gutted, as you say, at least you have learnt from it though
Hope to see your new one soon!
63 pages of waffle!! lol...I hope you DO learn from this
Yer mate looks like your taking a dumb
If this had been the case, I would have expected to see him squatting inside your car
ooooooo harsh