The rear one works fine. The front one doesn't. The MOT man got it going late last year

I've tried pushing pins down the jets.When I press the button there is no visible trace of water under the bonnet so I'm discounting disconnected pipes

Any ideas It's on a 53 plate

Ian

Can you actually hear the washer motor going when you try to activate it? If not could be a faulty pump or a broken cable? If you can there could be a blockage somewhere

Had it where my front was working but back wasnt (SEAT alahmabra) Fault revealed itself after a while when the front passenger carpet was wet. A joint on the pipe had pulled apart. You need to trace pipe Possibly blocked with gunge

You can often get gunk building up at the bottom of the resevoir. Can you disconnect the outlet pipe and see if it's clear?