hi all i fitted indiglow dials today and as usual sort one thing and another plays up.
for sum reason instead of the handbreak light coming on when i lift the brake the airbag warning light comes on any ideas guys?

did you do any rewiring?

is the airbag warning light in the position that the handbrake light was in on the original dials?

no rewiring, and all in same place as original dials

strange one then.

check your connections again you may have connected soemthing up to the wrong place - thats all I can think of

thats what i would think but there is only 3 plugs that are different sizes so it cant be connected wrong :-s

the only other thing I can think of then is that a connection has been knocked or shorted out inside in the process of fitting the dials

might be worth taking them out and seeing if it still happens?

If you do find out, make sure you let us know

The replacement cluster may have a fault/built wrong

same cluster just replaced the faces?
confusing

i small piece of wire may of gotton caught between the push connector were you plug it back in, failin that just take the dam bulb out

Works every time

Testify

noted thanks lol