Guide: Fitting Cruisewirral Stickers - 2nd Feb 2008 7:40pm
This is a simple guide describing how to fit your Cruisewirral.com Stickers.
Please note that these are intended to stick on the outside of your vehicle.
Step 1.
Clean the surface you are going to put the sticker on.
Note: If sticking to windows, warm windows will help them to stick better
Get your sticker and press the clear film against the lettering.
Step 2.
Start peeling away the white backing paper ensuring that the lettering sticks to the clear film.
Place the sticker face down on a flat surface and continue to peel the white backing paper. The lettering peels off onto the clear film easier if you peel the white backing paper on an angle.
The white backing paper can then be discarded.
Step 3.
Ensure the surface that you are going to stick it to is clean and and free from dust and dirt.
Align the clear film with the lettering on against the surface.
Press firmly around lettering ensuring there are no air bubbles.
Make sure the edges of the star are firmly stuck too.
Step 4.
Peel away the clear film to reveal your sticker and discard the clear film.
Please note that these are intended to stick on the outside of your vehicle.
Step 1.
Clean the surface you are going to put the sticker on.
Note: If sticking to windows, warm windows will help them to stick better
Get your sticker and press the clear film against the lettering.
Step 2.
Start peeling away the white backing paper ensuring that the lettering sticks to the clear film.
Place the sticker face down on a flat surface and continue to peel the white backing paper. The lettering peels off onto the clear film easier if you peel the white backing paper on an angle.
The white backing paper can then be discarded.
Step 3.
Ensure the surface that you are going to stick it to is clean and and free from dust and dirt.
Align the clear film with the lettering on against the surface.
Press firmly around lettering ensuring there are no air bubbles.
Make sure the edges of the star are firmly stuck too.
Step 4.
Peel away the clear film to reveal your sticker and discard the clear film.