Forums65
Topics76,352
Posts1,033,280
Members14,560
|
Most Online16,551 Feb 2nd, 2024
|
|
14 members (ArranGirl13, 3 invisible),
7,530
guests, and
650
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
M |
T |
W |
T |
F |
S |
S |
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Joined: Oct 2007
Posts: 494
Smartchild
|
OP
Smartchild
Joined: Oct 2007
Posts: 494 |
Has any one got one of these and successfully connect it to an external Sata hdd? My drive beeps when connected to the I-on media player but is fine when connected to the Pc, I am assuming therefore that the hdd needs extra power and although the connecting lead has 2 USB ports, 1 for data/power an 1 for power only, there is only one USB port on the media player to draw power from. Any suggestions how to get around this? Have thought about a mains powered USB hub but think that this would put power in to the media players USB port and may damage it.
|
|
|
|
Joined: Feb 2010
Posts: 2,631
Forum Master
|
Forum Master
Joined: Feb 2010
Posts: 2,631 |
Hi, used a few of these, the problem that you have is that a USB port can only supply about 500mA (per port), fot most devices this is adequate, but for external drives there are some that need two ports, they are then wired in Parallel to give 1000mA (1A), so if you are only using one it has the correct voltage but not enough power to overcome the initial resistance to start the drive spinning.
The standard (non mains powered) USB hubs are fine for connecting small devices (webcam, FlashDrive etc) together as the current draw on them is minimal. and a device will only draw the power it needs.
Although the two leads on your drive are labelled power/data and power this wont matter when you plug them into a mains powered USB hub, the wiring is such that it makes no difference which USB socket you plug them into, that is the basis of USB.
We have a similar thing going on at the moment with people who want USB adapters for their iPads. The USB cables are all the same, but the adapter (either car or mains to USB) are usually only kicking out 500-800mA, which is enough to power an iPod or an iPhone but not an iPad. I've seen people on eBay selling "high power" adapters which put out 1000mA, but again this isn't enough (I know, I've tried them), you need 1200mA (1.2A) for it to work, and these adapters, although they look identical, cost a few pence more to make, so upto now everyone has always made the cheaper ones. (Check if you're buying)
If you want to test this just connect an iPad to you computer, it'll sync and you can write to it, but it wont charge.
Just in case I've wandered off too much: Single USB wont do it, you need two, if you only have a standard 1-4 hub that wont do it (you're still only using one socket). A mains powered USB hub is what you need, it'll be fine and it won't damage the drive.
|
|
|
|
Joined: Oct 2007
Posts: 494
Smartchild
|
OP
Smartchild
Joined: Oct 2007
Posts: 494 |
Hi dr, many thanks for the reply, will look into getting a powered USB hub!
Thanks again
|
|
|
Click to View Topic.
|
|
Posts: 8,973
Joined: July 2011
|
|
There are no members with birthdays on this day. |
|
Gaza
by diggingdeeper - 29th Oct 2023 9:28am
|
|
|
|
Xbox
by TudorBlue - 3rd Mar 2024 8:48pm
|
|
|
|
|