|
Forums65
Topics76,361
Posts1,033,314
Members14,578
| |
Most Online16,551
Feb 2nd, 2024
|
|
|
14 members (4 invisible),
9,722
guests, and
483
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
M |
T |
W |
T |
F |
S |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
|
29
|
30
|
|
|
|
|
|
|
|
|
Joined: Sep 2009
Posts: 90
Member
|
OP
Member
Joined: Sep 2009
Posts: 90 |
Not sure why they are squeeking, or how to stop then sqeeking. Any ideas please
|
|
|
|
|
Joined: Jan 2010
Posts: 872
Wise One
|
|
Wise One
Joined: Jan 2010
Posts: 872 |
One for Chris Gilly I feel
|
|
|
|
|
Joined: Jul 2008
Posts: 14,350 Likes: 20
Wiki Master
|
|
Wiki Master
Joined: Jul 2008
Posts: 14,350 Likes: 20 |
If the surfaces aren't worn down, there is a spray for brake surfaces but I don't recommend this.
Usually a bit of copper-grease on the back of the pads and along the moving edges sorts it out, if there are anti-squeel shims or springs, grease them likewise, very thin amount.
Make sure you don't get any grease on braking surfaces or in places likely to leech to them. Don't use a normal grease, its not high enough temperature rated.
We don't do charity in Germany, we pay taxes. Charity is a failure of governments' responsibilities - Henning Wehn https://ddue.uk
|
|
|
|
|
Joined: Nov 2003
Posts: 12,002
Wiki Master
|
|
Wiki Master
Joined: Nov 2003
Posts: 12,002 |
Are they getting low? Pads often have a steal spring which touches the rotor when they wear down, and make the pads squeek to let you know they are getting low.
Pads can also squeek if the discs are getting low and there is a lip on their edge.
If there is plenty of meat on them, greasing them like DD said should fix it.
What If There Were No Hypothetical Questions?
|
|
|
|
|
Joined: Sep 2009
Posts: 90
Member
|
|
OP
Member
Joined: Sep 2009
Posts: 90 |
they have only been replaced last month
|
|
|
|
|
Joined: Feb 2009
Posts: 1,952
Forum Addict
|
|
Forum Addict
Joined: Feb 2009
Posts: 1,952 |
defo copper grease the backs however if a cheap brand of pads were used then he friction linings tend to be a poor quality and squeal anyhoo,
Also maybe worth changing discs too.
|
|
|
|
|
Joined: Sep 2009
Posts: 139
Enthusiast
|
|
Enthusiast
Joined: Sep 2009
Posts: 139 |
He used Mintex pads and discs. A decent brand??
|
|
|
|
|
Joined: Dec 2003
Posts: 8,019
Wiki Veteran
|
|
Wiki Veteran
Joined: Dec 2003
Posts: 8,019 |
Mine are doing the same too and I used mintex, I even took them off and applied copper grease. So im completely stumpted too.
Uncertainty or not knowing causes depression, Im happy because I know I'm going to die one day!
|
|
|
|
|
Joined: Feb 2009
Posts: 38
Newbeee
|
|
Newbeee
Joined: Feb 2009
Posts: 38 |
Mintex are known to squeek a lot but they are one of the best pads available for performance.
|
|
|
|
|
Joined: Nov 2003
Posts: 12,002
Wiki Master
|
|
Wiki Master
Joined: Nov 2003
Posts: 12,002 |
Depends on the pad compound - the OEM replacements shouldnt be any harder than the OEM pads. When putting some copper slip on the back of the pads / anti squeel shims, als give the caliper and carrier a good wire brushing where the pad sits, and also copper slip the tracks that the pads move in. Obviously dont slap it on everywhere, but if it gets on the brakes its not a major issue as it will clear it off first time you brake 
What If There Were No Hypothetical Questions?
|
|
|
|
|
Joined: Dec 2003
Posts: 5,683
Wiki Guide
|
|
Wiki Guide
Joined: Dec 2003
Posts: 5,683 |
Yeah, wire brush the whole area. I've been done twice in the past by that metal 'low pad' screeching sound, I thought my wheel was about to come off, I had no idea what it was.
The pads squeak because they're not greased up, just cover them with copper grease
"C20 LET bang"
|
|
|
|
|
Joined: Sep 2009
Posts: 806
Wise One
|
|
Wise One
Joined: Sep 2009
Posts: 806 |
cover the back though NOT the bit that touches the disk!
|
|
|
Click to View Topic.
|
|
|
Posts: 2,283
Joined: December 2010
|
|
|
There are no members with birthdays on this day. |
|
|
|
