Right, as some of you know I bought myself an Arc welder.
I've never tried welding before so I'm a complete novice and have no idea lol
so I practised with it over the weekend and I'm having a few problems....either:
a) I have the wrong set up b) I have the wrong electrodes/rods c) I'm shit (most likely)
The problem is, I can get it to actually arc and weld. The best I can do is strike the electrode like a match along the bit I want welding, but the electrode just gets hot and melts and doesnt even stick.
I've watched how to videos and they make it look so easy lol
If I don't do that and try and run it along maintaining an arc, the electrode just sticks and I end up dragging the plate.
I've tried it at 45 degrees, 90 degrees, tried maintaining the arc, but it just doesnt stike up and stay, ive tried increasing the current too.
I've tried everything, so somethings up and im thinking its me or the rods.
Any ideas??
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
Tap it first to start the arch and then you should be able to keep it going.
Instead of trying to WELD Tap it then WELD when its Arching.
You probably have shit Rods, and that's why it looks easy on the videos. Or the settings need tweaking Kyle should be able to help with that, throw a link in your MMC to this topic.
the surfaces are clean - bare metal to bare metal (shiney)
If I tap it, the rod just sticks, no arching??
Probablt is jsut shit rods, I'll buy some thicker ones anyway
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
theyre not out of the kid, so yeah, theyre probably wrong.
around 50amps
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
I appreciate that, but I bought it before you told me
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
dont worry mate you just need to keep practicing it taqkes time now the most important thing when welding is to keep the surface clean of paint and oil, now because you are only welding a car the plate will be thin so you will only need thin rods such as 2mm 5mm are just to big now when im setting a arc up i just try practicing on a thin plate till your ready to weld and just keep adjusting the amps and just keep striking it on the plate and it will start welding mate
now if your rods are sticking this is because your amps are not high enough but you dont need it to high or it will just destroy the plate it doesnt really matter how long your rods are they will still weld m,ate hope this info helps
I've bought some different rods, so will give them a try when they come 2moro
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
after going through about 10 rods, i managed to weld an L bracket to a 3mm thick plate and it stuck, and held the weight of the plate, but the weld quality was shite as if i pulled on the L bracket, it came off with little force.
I also managed to do a pretty neat weld in a line, but I got too frustrated in the end as the rods keep sticking still.
I found if I hold the rod at the smallest angle (i.e. close to the plate) its a lot easier to maintain an arc.
Practise, practise, practise
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.
I had another practise the other week. Only just found the photos.
I actually managed to get it to weld and stick.....although the weld quality is completely shite.
It holds my weight if I stand on it though, so im happy lol.
Just gotta learn to keep it steady to get a good quality weld.
Might practise again this week before it starts getting too dark of an evening
Autowirral.co.uk - The Northwest's Biggest forum of Motoring Enthusiasts. Cruisewirral.com - The Northwest's Biggest forum of Modified Car Enthusiasts.